Selleys Wet Area Silicone in Detail

Compare the products below with your materials, conditions and the finish you need.

Selleys Wet Area Silicone

Use the range links below to compare standard and matt finishes, colours and product-specific instructions.

Define the joint before choosing the sealant

Identify every surface in contact with the sealant, including coatings, primers, backing materials and adjacent stone or metal. Record the joint width and depth, expected movement, indoor or outdoor exposure, water exposure, temperature and required appearance. These facts determine whether a general silicone, neutral-cure product, specialist glazing sealant, wet-area product or another system is appropriate.

Check cure type, adhesion requirements, tooling time, movement capability, paintability and excluded substrates on the exact product page. Do not treat elongation at break as a rated joint-movement figure. Water resistance, mould resistance and weather resistance also answer different questions and do not establish suitability for permanent immersion.

Plan removal, preparation and cure

  1. Remove old sealant and loose material without damaging the adjoining surfaces.
  2. Clean and dry the joint using only compatible preparation products.
  3. Use backing material and joint dimensions where the product instructions require them.
  4. Mask, apply and tool within the stated working time.
  5. Protect the bead from water, movement and service until the relevant cure milestone.

Verify specialist applications

Glazing, mirrors, natural stone, aquariums, drinking-water contact, structural joints and permanent immersion need explicit product coverage. Use the current Technical Data Sheet and Australian Safety Data Sheet for the supplied pack, and ask Selleys when the documentation does not establish compatibility.

Compare finish, cure and limitations on the exact product

The standard and matt products share a wet-area purpose, but their formulation, finish, colour options, cure information and safety documents are product-specific. Open the exact product page rather than applying one page’s directions to the whole range. Compare a physical colour and finish sample with the tile, grout, benchtop or fitting in the lighting where the bead will be seen.

Complete painting before applying a non-paintable silicone and observe the stated waiting period. Plan the joint so old sealant can be removed, the surfaces can be cleaned and dried, and the new bead can be applied and tooled without interruption. Protect the new seal from water and movement for the time stated for the exact product and joint conditions.

What the range claim does and does not establish

A mould-resistant formulation still needs correct preparation, ventilation and routine cleaning. The published guarantee conditions apply to the named product and circumstances; they do not promise that a joint will remain mould-free. Waterproofing a sealant joint also does not make the product suitable for aquariums, drinking-water contact, food contact or permanent immersion.

What to check for your job

Compare the options: Selleys Wet Area Silicone in Detail

Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.

  1. Suitability: both substrates, coatings and service conditions.
  2. Application: preparation, tools, dimensions, coverage and working time.
  3. Waiting: support removal, water exposure, sanding, painting and full cure.
  4. Finish: colour, visibility, flexibility, paintability and clean-up.
  5. Evidence: the current pack, Technical Data Sheet and Australian Safety Data Sheet.

Open the individual page for every shortlisted product. Where this category contains a retained discontinued page, use it to identify older stock or work and confirm current availability or a replacement directly with us.

Complete joint-planning checklist for Selleys Wet Area Silicone in Detail

Record every adjoining material, coating and primer; the joint width and depth; expected movement; water, weather and temperature exposure; and the required colour, finish and paintability. Cure chemistry, substrate compatibility and joint geometry matter as much as the range name.

  1. Remove failed sealant and contamination without damaging the surrounding surface.
  2. Confirm whether primer, backing rod or a particular joint ratio is required.
  3. Plan masking, application and tooling within the published working time.
  4. Protect the bead from water, movement, dust and service during cure.
  5. Use the exact product documents for paint, immersion and maintenance limits.

Do not treat elongation at break as rated joint movement, or mould resistance as a promise of a maintenance-free joint. Aquariums, drinking water, natural stone, structural glazing and permanent immersion need explicit approval.

More help for your project

Use these pages to compare the exact product, method or application that follows from Selleys Wet Area Silicone in Detail. A related page is a route into more specific information, not evidence that every product is interchangeable.

Product instructions and safety sheets

Ready to choose a product? Use the links below for the products featured on this page. Check the exact product, pack and application before you start. Each product has its own directions and limitations.

Need help matching a document or checking your job? Contact our team. You can also find a store.

Also in this range

Also listed under this category:

Can I paint over Wet Area Silicone?

No. Standard and Matt White are not paintable. Complete surrounding painting at least seven days before applying either silicone.

Does mould resistance mean I never need to clean the seal?

No. Clean regularly to avoid soap-scum build-up and follow the product’s care instructions.

Is Matt White available in all the standard colours?

No. Our brand range lists Matt White as the matt option, in a 420 g cartridge. The nine-colour list belongs to the standard range; confirm availability with your retailer.

When can I expose the new seal to water?

Follow the 72-hour cure direction for standard Wet Area Silicone and Matt White. Neither is suitable for permanent immersion, even after cure.

What should I know about Selleys Wet Area Silicone?

Use the range links below to compare standard and matt finishes, colours and product-specific instructions. Wet Area Silicone product details; Wet Area Matt White Silicone; All wet-area sealants.

How do I define the joint before choosing a sealant?

Identify every surface in contact with the sealant, including coatings, primers, backing materials and adjacent stone or metal. Record the joint width and depth, expected movement, indoor or outdoor exposure, water exposure, temperature and required appearance. These facts determine whether a general silicone, neutral-cure product, specialist glazing sealant, wet-area product or another system is appropriate.

How should I plan removal, preparation and cure?

Remove old sealant and loose material without damaging the adjoining surfaces; Clean and dry the joint using only compatible preparation products; Use backing material and joint dimensions where the product instructions require them; Mask, apply and tool within the stated working time; Protect the bead from water, movement and service until the relevant cure milestone.

How do I verify a specialist application?

Glazing, mirrors, natural stone, aquariums, drinking-water contact, structural joints and permanent immersion need explicit product coverage. Use the current Technical Data Sheet and Australian Safety Data Sheet for the supplied pack, and ask Selleys when the documentation does not establish compatibility.

How do I compare finish, cure and limitations on the exact product?

The standard and matt products share a wet-area purpose, but their formulation, finish, colour options, cure information and safety documents are product-specific. Open the exact product page rather than applying one page’s directions to the whole range. Compare a physical colour and finish sample with the tile, grout, benchtop or fitting in the lighting where the bead will be seen.

What the range claim does and does not establish?

A mould-resistant formulation still needs correct preparation, ventilation and routine cleaning. The published guarantee conditions apply to the named product and circumstances; they do not promise that a joint will remain mould-free. Waterproofing a sealant joint also does not make the product suitable for aquariums, drinking-water contact, food contact or permanent immersion.

What should I check for my job?

A neutral-cure silicone sealant for waterproof, mould-resistant seals in bathrooms, kitchens and laundries. Mould resistance does not mean a maintenance-free or permanently mould-free seal; The 25-year guarantee covers crumbling, cracking or peeling under the TDS conditions, including directed private use within 12 months of purchase and proof of purchase. It is not a 25-year mould-free guarantee; The retail page lists approximately 2 mm per 24 hours; the linked TDS directions state 72 hours without a universal daily rate. Follow the matching label and joint conditions; Not paintable; finish painting seven days before applying. Not for PE, PP, PTFE, aquariums, food or drinking-water contact, or permanent immersion.

How do I compare the options?

Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.