Roofing Products

Compare the products below with your materials, conditions and the finish you need.

Which of our products do you need for a roof or gutter, and how do you choose?

Every one of our products the catalogue associates with roofing is a roof and gutter sealant — a product for stopping water getting in at a joint, a lap, a flashing or a split, rather than for rebuilding the roof itself. The choice between them comes down to two questions: how you want to apply it, and whether the surface is going to be dry when you get there.

That second question is the one that catches people out. A roof leak announces itself in the rain, which is exactly the moment most sealants cannot be applied. Two products in this range are described specifically for wet surfaces, and knowing which they are saves you a wasted trip up a ladder.

How to choose

By application method

Three of the five are cartridge or gun products applied as a bead. One, Roof & Gutter Spray Seal, is described as easy to apply and is the option to look at where getting a gun into position is the hard part of the job — a spray reaches areas a nozzle cannot.

By whether the surface is wet

This is the distinction that matters most on a roof. Selleys Storm Sealant is described as delivering an immediate waterproof seal on any building material, wet or dry, indoors or outdoors. Roof & Gutter Spray Seal is described as working on wet surfaces.

Those two are therefore the products to reach for when the leak is active. The others are conventional sealants and you should assume they want a clean, dry substrate unless their own product page says otherwise.

By chemistry

Roof & Gutter Speed Seal is described as a neutral (non-acid) 100% silicone offering superior adhesion and resistance to lifting. Neutral cure matters on a roof because roofing is largely metal — sheet, flashing, gutter, fixings — and a neutral cure silicone does not release acid onto those surfaces as it cures.

By whether it is a trade or general product

Pro Trade Roof & Gutter Silicone is described for general purpose roof and gutter and weather sealing where excellent adhesion and long-term reliability are required. Roof & Gutter Silicone is the general-range equivalent, described as providing a water-tight seal that resists cracking and shrinking.

What this category covers

The product listing on the live our roofing category page is loaded dynamically and could not be captured, so this page is built from the roof and gutter products our catalogue lists elsewhere. All of them sit under roofing silicone in the sealants range.

The products in this range

Compare the options: Roofing Products

Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.

  1. Suitability: both substrates, coatings and service conditions.
  2. Application: preparation, tools, dimensions, coverage and working time.
  3. Waiting: support removal, water exposure, sanding, painting and full cure.
  4. Finish: colour, visibility, flexibility, paintability and clean-up.
  5. Evidence: the current pack, Technical Data Sheet and Australian Safety Data Sheet.

Open the individual page for every shortlisted product. Where this category contains a retained discontinued page, use it to identify older stock or work and confirm current availability or a replacement directly with us.

Complete joint-planning checklist for Roofing Products

Record every adjoining material, coating and primer; the joint width and depth; expected movement; water, weather and temperature exposure; and the required colour, finish and paintability. Cure chemistry, substrate compatibility and joint geometry matter as much as the range name.

  1. Remove failed sealant and contamination without damaging the surrounding surface.
  2. Confirm whether primer, backing rod or a particular joint ratio is required.
  3. Plan masking, application and tooling within the published working time.
  4. Protect the bead from water, movement, dust and service during cure.
  5. Use the exact product documents for paint, immersion and maintenance limits.

Do not treat elongation at break as rated joint movement, or mould resistance as a promise of a maintenance-free joint. Aquariums, drinking water, natural stone, structural glazing and permanent immersion need explicit approval.

Details to check before you choose

More help for your project

Use these pages to compare the exact product, method or application that follows from Roofing Products. A related page is a route into more specific information, not evidence that every product is interchangeable.

Can I expose Spray Seal to rain immediately because it works on wet surfaces?

No. Its directions state approximately two hours before rain readiness. Follow the preparation, coating and drying directions for your conditions.

Is Point Works a roof and gutter silicone?

No. Point Works is a roof-pointing compound for hip and ridge tiles, with its own installation and weather requirements.

Which of our products do you need for a roof or gutter, and how do you choose?

Every one of our products the catalogue associates with roofing is a roof and gutter sealant — a product for stopping water getting in at a joint, a lap, a flashing or a split, rather than for rebuilding the roof itself. The choice between them comes down to two questions: how you want to apply it, and whether the surface is going to be dry when you get there.

How do I choose?

Three of the five are cartridge or gun products applied as a bead. One, Roof & Gutter Spray Seal , is described as easy to apply and is the option to look at where getting a gun into position is the hard part of the job — a spray reaches areas a nozzle cannot.

What does this category cover?

The product listing on the live our roofing category page is loaded dynamically and could not be captured, so this page is built from the roof and gutter products our catalogue lists elsewhere. All of them sit under roofing silicone in the sealants range.

Which products are in this range?

Selleys Roof & Gutter Silicone — keeps roofs and gutters leak-free with a water-tight seal that resists cracking and shrinking; Selleys Roof & Gutter Speed Seal — a neutral (non-acid) 100% silicone for repairing leaks in most forms of roofing and guttering, with superior adhesion and resistance to lifting; Selleys Roof & Gutter Spray Seal — a quick and easy fix for roof and gutter leaks, easy to apply and works on wet surfaces; Selleys Storm Sealant — delivers an immediate waterproof seal on any building material, wet or dry, indoors or outdoors.

How do I compare the options?

Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.

What should I know about complete joint-planning checklist for Roofing Products?

Record every adjoining material, coating and primer; the joint width and depth; expected movement; water, weather and temperature exposure; and the required colour, finish and paintability. Cure chemistry, substrate compatibility and joint geometry matter as much as the range name. Do not treat elongation at break as rated joint movement, or mould resistance as a promise of a maintenance-free joint.

What details should I check before choosing?

The Roofing Products page (https://www.selleys.com.au/products/roofing/) is a directory page that lets trade professionals browse our roofing products; It is ideal for metal roofing, tile roofing, Colorbond roofs and fences, guttering, flashings, skylights, and air conditioning units, and is compatible with aluminium, sheet metal, and galvanised iron surfaces; The PRO-TRADE Roof & Gutter Sealant is a high-quality 100% neutral (oxime) cure silicone formulated for general-purpose roof and gutter sealing; It has low slump, is weather and UV resistant, offers long-term durability, will not corrode metals, and is AS4020 approved for potable water.

What should I know about by whether the surface is wet?

This is the distinction that matters most on a roof. Selleys Storm Sealant is described as delivering an immediate waterproof seal on any building material, wet or dry, indoors or outdoors. Roof & Gutter Spray Seal is described as working on wet surfaces. Those two are therefore the products to reach for when the leak is active.

What should I know about by chemistry?

Roof & Gutter Speed Seal is described as a neutral (non-acid) 100% silicone offering superior adhesion and resistance to lifting. Neutral cure matters on a roof because roofing is largely metal — sheet, flashing, gutter, fixings — and a neutral cure silicone does not release acid onto those surfaces as it cures.

What should I know about by whether it is a trade or general product?

Pro Trade Roof & Gutter Silicone is described for general purpose roof and gutter and weather sealing where excellent adhesion and long-term reliability are required. Roof & Gutter Silicone is the general-range equivalent, described as providing a water-tight seal that resists cracking and shrinking. The product listing on the live our roofing category page is loaded dynamically and could not be captured, so this page is built from the roof and gutter products our catalogue lists elsewhere.