Other Glues

How to choose between them

The two are not alternatives to each other. The question that separates them is whether the bond is meant to be permanent.

3 in 1 is the product for a job that combines tasks. Where you would otherwise buy an adhesive to stick something down, a sealant to weatherproof the joint and a filler to close the gap beside it, this is described as doing all three. That versatility is its value, and it is also the reason to read its product page before committing: a product described for "virtually any surface" still has stated limits, and those limits are on our product page, not here.

Easy Tack is the opposite proposition. It is a pressure adhesive — you press it to stick, and it is reusable, so it comes off and goes back on. It is for lightweight objects, which is a real constraint rather than a suggestion. A poster is the example we give; anything with weight belongs on a mechanical fixing or a permanent adhesive.

The products in this category

Where to look instead

If neither of these is right, the job almost certainly belongs to one of the named adhesive categories:

What is in the Selleys "other glues" category?

This is the small catch-all category for our adhesives that do not fit the contact, construction, epoxy, super glue, wood or specialist families. Two products are published under it, and they sit at opposite ends of the permanence scale: one bonds almost anything permanently, the other is designed to let go again.

If you are browsing our selection of versatile glues for fixing, crafting or repairing, those two products are what this path holds. Everything else in the adhesive range lives in a named sub-category.

Define the bond before choosing the adhesive

Name both materials and any paint, coating, laminate or backing film. Decide whether each surface is porous, whether the joint has gaps, and whether it will face load, vibration, movement, weather, water or heat. A product that works on one timber-to-masonry joint may not be suitable for a mirror, flexible plastic, coated metal or continuously wet application.

Compare working time, repositioning time, initial grab, required bead pattern, temporary support and full cure. A fast-grab or rapid-setting statement does not mean immediate full strength. Heavy, stressed and overhead work may require support or mechanical fixing even when the adhesive has a high initial grab.

Prepare and assemble the joint

  1. Confirm the product covers both substrates and the service conditions.
  2. Remove dust, grease, moisture, loose coatings and release contamination as directed.
  3. Dry-fit the parts and plan supports before applying adhesive.
  4. Apply the stated bead, spread or contact method and assemble within the working time.
  5. Maintain support and avoid loading until the relevant cure instruction is satisfied.

Read limitations before application

Check excluded plastics, mirrors, polystyrene, permanent immersion, structural use and temperature limits on the exact product. Use the current pack label, Technical Data Sheet and Australian Safety Data Sheet. Where two manufacturer sources disagree, keep both values visible and ask which applies to the supplied formulation.

What to check for your job

Compare the options: Other Glues

Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.

  1. Suitability: both substrates, coatings and service conditions.
  2. Application: preparation, tools, dimensions, coverage and working time.
  3. Waiting: support removal, water exposure, sanding, painting and full cure.
  4. Finish: colour, visibility, flexibility, paintability and clean-up.
  5. Evidence: the current pack, Technical Data Sheet and Australian Safety Data Sheet.

Open the individual page for every shortlisted product. Where this category contains a retained discontinued page, use it to identify older stock or work and confirm current availability or a replacement directly with us.

Complete bond-planning checklist for Other Glues

Write down both substrates, including paint, coatings, laminates, backing films and whether each surface is porous. Define the joint gap, load direction, vibration, movement, water, weather, heat and required finish. These details decide whether the named product is suitable and whether temporary support or permanent mechanical fixing is required.

  1. Confirm both materials and every surface treatment are listed or otherwise covered by the current instructions.
  2. Separate working time, repositioning time, initial grab, support-removal time and full cure.
  3. Dry-fit the parts and prepare clamps, braces or fixings before opening the product.
  4. Follow the stated bead, spread, contact or assembly method.
  5. Keep the joint unloaded and within the specified conditions until the relevant cure milestone.

Do not transfer a strength, grab or cure claim from another formulation in the same range. Mirrors, flexible plastics, polystyrene, continuously wet areas, overhead work and structural loads require explicit product coverage.

Details to check before you choose

More help for your project

Use these pages to compare the exact product, method or application that follows from Other Glues. A related page is a route into more specific information, not evidence that every product is interchangeable.

Are 3 in 1 and Easy Tack alternatives for the same job?

No. 3 in 1 is used for its specified bonding, sealing and filling jobs; Easy Tack is a reusable mounting adhesive for lightweight items.

Can I apply solvent-based paint directly over 3 in 1 White?

Its TDS says not to paint directly with solvent-based paint. Apply a water-based paint first if a solvent-based topcoat is required.

Will Easy Tack remove without a mark from every surface?

No. Some substrates may retain residue; it is not suitable for delicate or porous surfaces or recommended for freshly painted surfaces.

How do I choose between them?

The two are not alternatives to each other. The question that separates them is whether the bond is meant to be permanent. 3 in 1 is the product for a job that combines tasks. Where you would otherwise buy an adhesive to stick something down, a sealant to weatherproof the joint and a filler to close the gap beside it, this is described as doing all three.

What is the products in this category?

Selleys 3 in 1 Adhesive, Sealant & Gap Filler — an extremely versatile product, described as suiting virtually any sealing, bonding and filling application on virtually any surface; Selleys Easy Tack — a multi-purpose reusable pressure adhesive for use where you want a temporary bond, used around the world to mount posters and other lightweight objects.

Where to look instead?

If neither of these is right, the job almost certainly belongs to one of the named adhesive categories: All purpose glues — minor repairs across a variety of materials; Super glue — small, fast repairs; Construction adhesives — building materials and fixtures; Specialist glue — plastics, footwear and marine work; Wood glue — timber and joinery.

What is in the Selleys "other glues" category?

This is the small catch-all category for our adhesives that do not fit the contact, construction, epoxy, super glue, wood or specialist families. Two products are published under it, and they sit at opposite ends of the permanence scale: one bonds almost anything permanently, the other is designed to let go again.

How do I define the bond before choosing the adhesive?

Name both materials and any paint, coating, laminate or backing film. Decide whether each surface is porous, whether the joint has gaps, and whether it will face load, vibration, movement, weather, water or heat. A product that works on one timber-to-masonry joint may not be suitable for a mirror, flexible plastic, coated metal or continuously wet application.

How do I prepare and assemble the joint?

Confirm the product covers both substrates and the service conditions; Remove dust, grease, moisture, loose coatings and release contamination as directed; Dry-fit the parts and plan supports before applying adhesive; Apply the stated bead, spread or contact method and assemble within the working time; Maintain support and avoid loading until the relevant cure instruction is satisfied.

How do I read limitations before application?

Check excluded plastics, mirrors, polystyrene, permanent immersion, structural use and temperature limits on the exact product. Use the current pack label, Technical Data Sheet and Australian Safety Data Sheet. Where two manufacturer sources disagree, keep both values visible and ask which applies to the supplied formulation.

What should I check for my job?

The 'Other Glues' page is our product category page that showcases their selection of versatile glues designed for various materials and applications, helping users find the ideal adhesive for fixing, crafting, or repairing projects. If you are browsing our selection of versatile glues for fixing, crafting or repairing, those two products are what this path holds. Everything else in the adhesive range lives in a named sub-category; The page is published by us, an Australian adhesives, sealants and fillers brand and a division of DuluxGroup (Australia) Pty Ltd; We were founded in 1939 in Sydney, Australia, by Martin Selley.

How do I compare the options?

Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.