Which Selleys super glue do you need, and how do you choose?

All ten products in this category do the same basic job: a fast, strong bond on a small repair. What actually separates them is how the glue comes out of the pack and whether you get time to line the pieces up. Strength is not the variable here; control is.

So the choice starts with one question. If the two broken faces will only fit together one way and you can hold them there, a standard 10-second super glue is the fastest route. If the break needs adjusting after the pieces meet — a clean snap that has to align perfectly, or a part you need to nudge square — you want the adjustable gel instead, which is formulated to give you extra time to adjust.

How to choose

Fast set, no adjustment

Selleys Fix & Go Super Glue sets in just 10 seconds for a strong and durable bond, and is aimed at small repairs around the home. This is the default: quick, reliable, and unforgiving about alignment.

Extra time to line it up

Selleys Super Glue Adjustable Gel and Fix & Go Adjustable Gel are both described as letting you perfectly align your break, with extra time to adjust for a perfect fix. A gel also stays where you put it rather than running, which matters on a vertical or overhead break.

Fine detail work

Selleys Super Glue High Precision is for precise bonding on fine details, and Selleys names ceramics and jewellery. Fix & Go High Precision Bottle Super Glue is the Fix & Go equivalent format.

Wide or awkward surfaces

Fix & Go Brush On Super Glue uses a brush applicator for small repairs and sets in 10 seconds. A brush spreads a thin, even film across a face, which a nozzle cannot do — useful when the break is a broad flat surface rather than an edge.

Keeping it off your fingers and the bench

Fix & Go No More Mess Super Glue and Super Glue Stand-up are both described as dispensing the glue precisely where you need it, with no mess or fuss. The stand-up format also means the bottle does not tip over mid-job.

If you only need it once

Super glue that has been opened does not last indefinitely, which is why single-shot packs exist. Super Glue Single Shot 5x1mL Pack is described as letting you make a minor repair with less product waste, with the same 10-second set. Super Glue Adjustable Gel Single Shot 4x1g Pack is the single-shot version of the adjustable gel.

The products in this range

• Fix & Go Super Glue — sets in 10 seconds, for small repairs around the home.
• Fix & Go Brush On Super Glue — brush applicator, small repairs, sets in 10 seconds.
• Fix & Go No More Mess Super Glue — dispenses precisely with no mess.
• Fix & Go Adjustable Gel — extra time to adjust for a perfect fix.
• Fix & Go High Precision Bottle Super Glue — the high precision bottle format in the Fix & Go range.
• Super Glue Adjustable Gel — extra time to adjust and align the break.
• Super Glue Adjustable Gel Single Shot 4x1g Pack — the adjustable gel in four single-use 1g doses.
• Super Glue High Precision — precise bonding for fine details, ceramics and jewellery.
• Super Glue Single Shot 5x1mL Pack — five single doses, less waste, sets in 10 seconds.
• Super Glue Stand-up — stand-up bottle that dispenses precisely with no mess.

Hazard: this range is uniform, and that is the useful finding

Unlike most Selleys categories, there is no safety divide here to choose between. Every product in this range that publishes a hazard classification carries the same one: signal word Warning, under Safe Work Australia GHS 7, with four statements — H227 (combustible liquid), H315 (causes skin irritation), H319 (causes serious eye irritation) and H335 (may cause respiratory irritation). None is classified as Dangerous Goods for transport; all are C1 combustible for storage under AS 1940 and Poison Schedule S5. Choose on format and set time, because the safety case is the same whichever tube you pick.

Three qualifications are worth carrying away.

H335 is the classification people do not expect from a 3 mL tube. Cyanoacrylate cures by reacting with moisture, and the vapour reacts with the moisture in your eyes and airways the same way — which is why a freshly glued joint stings the eyes and catches the throat. How much vapour you get is a question of exposed surface area, so the format does change your exposure even though it does not change the classification. Brush On deliberately spreads a thin film across as much surface as the joint has, which is exactly why it bonds well on a long glue line and also why it puts the most vapour in the air per repair. Open a window for that one in particular.

H227 is a storage rule, not a bench rule. The flash point is 80–93.4 °C — Category 4, the mildest rung of the flammability scale, and nowhere near anything you do at room temperature. It asks only that you keep the tube out of a hot car and off a sunny windowsill.

One product in this range publishes no safety data at all. Fix & Go Adjustable Gel has no hazard classification, no composition and no first aid on its page, where its nine siblings all do. Read that as missing data rather than as an all-clear — it is a cyanoacrylate gel like the rest, and the sensible assumption is that the classification above applies to it too.

Composition is also not quite uniform, and one product is the exception. Almost every Selleys super glue declares ethyl cyanoacrylate (CAS 7085-85-0) at more than 60%. Super Glue High Precision declares a methoxyethyl cyanoacrylate (CAS 27816-23-5) at 90–100% — a different monomer, at a markedly higher concentration, with essentially no thickener or filler in the bottle. The hazard classification comes out identical, but if you have ever reacted to one super glue and not another, that is the bottle that differs.

The behaviour everyone actually meets is not in the classification at all: it bonds skin in seconds, because skin is moist. If fingers bond together, do not pull them apart — apply a solvent such as acetone to the contact area and wash off with water, never near an eye or an open wound. For any bond involving an eye or eyelid, flush with water for at least 15 minutes and seek medical attention.

Comparing the super glues on the numbers that decide the job

Two figures decide a super glue purchase: how long you have to move the parts before it grabs, and how long before the repair can be trusted with load. They are not the same number, and confusing them is the commonest cause of a repair that comes apart.

Product	Set time	Full cure	Pack
Fix & Go Super Glue	Within 10 seconds	See product page	3 mL tube
Fix & Go High Precision Bottle	10 seconds	12 hours	3 mL bottle
Fix & Go No More Mess	10 seconds	~12 hours (initial cure 30 minutes)	3 mL tube
Super Glue Stand-up	10 seconds	~12 hours (initial cure 30 minutes)	3 mL tube
Super Glue Single Shot	10 seconds	12–24 hours to full strength	5 × 1 mL tubes
Fix & Go Brush On	Hold 30 seconds	12 hours	See product page
Fix & Go Adjustable Gel	~30 seconds	See product page	See product page
Super Glue Adjustable Gel	30 seconds	24 to 48 hours	3 g tube
Adjustable Gel Single Shot	30 seconds	24 to 48 hours	4 × 1 g tubes
Super Glue High Precision	Press for 30 seconds	See product page	3 mL bottle

The thirty seconds of adjustment the gels are bought for is paid for at the other end, and the bill is larger than the purchase. The liquids set in ten seconds and reach full strength in about twelve hours. The Adjustable Gels give you thirty seconds to line the parts up — the whole reason to choose them — and then take 24 to 48 hours to reach full cure, two to four times as long. For a repair you want to put back into service this evening, the liquid is the right choice even though it is less forgiving during the ten seconds you have. For a repair where the alignment is the hard part and there is no hurry, the gel is worth the wait.

Set time and full strength are different numbers, and the table is worth reading twice on that point. Ten seconds is how long you hold the pieces; twelve to forty-eight hours is when the joint can take load. A ceramic handle glued at lunchtime will feel solid within a minute and will not carry a full mug until the next day. Where a repair has to bear weight, the figure that matters is the right-hand one.

Single-shot packs change your exposure more than your chemistry. The classifications, the monomer and the set times are identical to the equivalent bottles. What changes is that a millilitre or a gram is the most that can be in play at any moment, there is no part-used tube with adhesive dried round the neck to be worked at with a fingernail before the next job, and no half-tube curing solid in a drawer between repairs. For someone who glues something twice a year, that is the format to buy — on waste, on reliability, and on the H315 and H335 classifications alike.

Selleys qualifies every set time in this range: set time and cure rate depend on the type, condition and closeness of the surfaces, and on atmospheric conditions. A loose joint in cold, dry air behaves differently from a tight one in a warm room — which is why a close-fitting joint matters more to the outcome than which tube you chose.

Common questions about Selleys super glue

How fast does Selleys super glue set?

Fix & Go Super Glue, Fix & Go Brush On Super Glue and the Super Glue Single Shot pack are all described as setting in 10 seconds.

What if I need to move the pieces after they touch?

Use one of the Adjustable Gel products. They are formulated to give extra time to adjust so you can align the break properly.

What is the difference between the "Fix & Go" and plain "Super Glue" products?

They are two lines covering similar formats — both include an adjustable gel and a high precision option. The individual product pages carry the pack sizes and details.

Which one should I use on ceramics or jewellery?

Super Glue High Precision, which Selleys names for precise bonding of fine details, ceramics and jewellery.

Which is best for a large flat break?

The Brush On version, which lets you lay a thin even coat across a face rather than a bead along an edge.

How do I avoid gluing my fingers together?

The No More Mess and Stand-up formats are both described as dispensing the glue precisely where you need it, with no mess or fuss.

Why would I buy single-shot packs?

To make a minor repair with less product waste — the single-shot packs give you a fresh small dose rather than a part-used bottle.

What should I use for a repair that has to carry weight?

Super glue is for small repairs. For load-bearing work, the Araldite epoxy range is the category designed for it.

Why does the page text talk about specialist adhesives?

The editorial paragraphs on the live Super Glue page are the Selleys specialist glue write-up, covering Liquid Nails Mirror Metal and Glass, Liquid Nails Landscape, MarineFlex and Shoe Fix. It is a content mismatch on the site, and none of it describes the super glues above. Those products are in the specialist glue category.