Selleys 600 Series: Professional Sealants and Hybrid Sealant Adhesives
Compare the products below with your materials, conditions and the finish you need.
Selleys 600 Series sealants and adhesives
This range covers flexible sealing and adhesive applications. Select by joint design and substrate, and distinguish current products from retained discontinued-product references.
Explore the range
- 650 Fc Fast Cure Adhesive Sealant
- 675 Crystal Fix Adhesive Sealant
- 655 Fc Fast Cure Adhesive Sealant
- 670 Fast Grab Adhesive Sealant
Define the bond before choosing the adhesive
Name both materials and any paint, coating, laminate or backing film. Decide whether each surface is porous, whether the joint has gaps, and whether it will face load, vibration, movement, weather, water or heat. A product that works on one timber-to-masonry joint may not be suitable for a mirror, flexible plastic, coated metal or continuously wet application.
Compare working time, repositioning time, initial grab, required bead pattern, temporary support and full cure. A fast-grab or rapid-setting statement does not mean immediate full strength. Heavy, stressed and overhead work may require support or mechanical fixing even when the adhesive has a high initial grab.
Prepare and assemble the joint
- Confirm the product covers both substrates and the service conditions.
- Remove dust, grease, moisture, loose coatings and release contamination as directed.
- Dry-fit the parts and plan supports before applying adhesive.
- Apply the stated bead, spread or contact method and assemble within the working time.
- Maintain support and avoid loading until the relevant cure instruction is satisfied.
Read limitations before application
Check excluded plastics, mirrors, polystyrene, permanent immersion, structural use and temperature limits on the exact product. Use the current pack label, Technical Data Sheet and Australian Safety Data Sheet. Where two manufacturer sources disagree, keep both values visible and ask which applies to the supplied formulation.
Compare the four products on the required outcome
Start with whether the joint primarily needs flexible sealing, adhesive strength, fast cure, high initial grab or a clear finish. Then compare substrate coverage, service temperature, cure rate, paint instructions and cleaning method on the exact product page. Do not transfer a figure from one 600 Series formulation to another.
Retained pages for discontinued products remain useful for identifying an existing installation or old stock, but they do not establish present availability or the correct replacement. Confirm both with us. For current products, match the supplied pack to the latest Technical Data Sheet and Australian Safety Data Sheet before specifying the job.
What to check for your job
- The manufacturer labels these products as discontinued. Their pages are retained as reference information for existing stock and previous installations. Confirm availability and any replacement with us. Select by joint design and substrate, and distinguish current products from retained discontinued-product references.
- Not for every bead. 650FC’s TDS gives at least 2.5 mm per 24 hours at 23°C and 50% relative humidity. Joint depth, moisture exposure and conditions affect full cure. Do not turn a daily cure-rate figure into a universal 24-hour full-strength claim.
- No. The product pages distinguish continuous service, short excursions and conflicting retail/TDS values. For example, 650FC’s TDS gives −40°C to +70°C with brief excursions to 100°C. Check the formulation and required exposure.
- No. Paint timing, primer requirements and cleanup vary. Some retail instructions differ from the linked TDS. Follow the current instructions matching the supplied product and test the paint and surface compatibility.
- A range comparison cannot establish the safest option for an application. Consult each product’s current Australian SDS, exposure controls and substrate limitations. Lack of a particular hazard classification is not a general safety guarantee. Select by joint design and substrate, and distinguish current products from retained discontinued-product references.
Compare the options: Selleys 600 Series: Professional Sealants and Hybrid Sealant Adhesives
Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.
- Suitability: both substrates, coatings and service conditions.
- Application: preparation, tools, dimensions, coverage and working time.
- Waiting: support removal, water exposure, sanding, painting and full cure.
- Finish: colour, visibility, flexibility, paintability and clean-up.
- Evidence: the current pack, Technical Data Sheet and Australian Safety Data Sheet.
Open the individual page for every shortlisted product. Where this category contains a retained discontinued page, use it to identify older stock or work and confirm current availability or a replacement directly with us.
Complete bond-planning checklist for Selleys 600 Series: Professional Sealants and Hybrid Sealant Adhesives
Write down both substrates, including paint, coatings, laminates, backing films and whether each surface is porous. Define the joint gap, load direction, vibration, movement, water, weather, heat and required finish. These details decide whether the named product is suitable and whether temporary support or permanent mechanical fixing is required.
- Confirm both materials and every surface treatment are listed or otherwise covered by the current instructions.
- Separate working time, repositioning time, initial grab, support-removal time and full cure.
- Dry-fit the parts and prepare clamps, braces or fixings before opening the product.
- Follow the stated bead, spread, contact or assembly method.
- Keep the joint unloaded and within the specified conditions until the relevant cure milestone.
Do not transfer a strength, grab or cure claim from another formulation in the same range. Mirrors, flexible plastics, polystyrene, continuously wet areas, overhead work and structural loads require explicit product coverage.
More help for your project
Use these pages to compare the exact product, method or application that follows from Selleys 600 Series: Professional Sealants and Hybrid Sealant Adhesives. A related page is a route into more specific information, not evidence that every product is interchangeable.
- Types of Sealants Explained | Find the Right Sealant for Your Project — In this guide, we show you how to plan the job, use our products as directed and get a reliable finish.
- Sealants for Home Improvement | High-Quality Sealant Solutions by us — Explore our guides to plan the job, choose suitable products and avoid common problems.
- Sealants, Adhesives, and Fillers Glossary — This glossary defines the trade and building terms that appear across our how-to guides and product pages — the words a data sheet or a set of instructions assumes you already know.
- Adhesives, Fillers, Sealants & More — For an adhesive, identify both substrates, whether either surface is porous, the load, the joint gap, the required working time and whether temporary support or mechanical fixing is needed.
- Selleys: Adhesives | Sealants | Putty Fillers | Glues | Cleaning Products - Australia — Use this site to move from a repair or improvement job to our exact product information, application guidance, limitations, technical documents and safety documents you need.
- Selleys Liquid Nails: Professional Construction Adhesives — The Liquid Nails range includes general construction, high-grab, flexible and project-specific adhesives. Match the product to the materials, exposure and required installation method.
- How Long Does It Take for 3 in 1 Sealant To Cure? — In this answer, we apply our product guidance to the materials and conditions in this question.
- Best Sealant for the Base of a Garden Shed — Before you buy anything, though, read the next section. Where you apply it matters more than which product you use.
Product instructions and safety sheets
Ready to choose a product? Use the links below for the products featured on this page. Check the exact product, pack and application before you start. Each product has its own directions and limitations.
- 650 FC Fast Cure Adhesive Sealant — product details and pack options
- 670 Fast Grab Adhesive Sealant — product details and pack options
- 675 Crystal Fix Adhesive Sealant — product details and pack options
Need help matching a document or checking your job? Contact our team. You can also find a store.
Which colours are shown for 650FC?
The range shows White, Grey and Black. Confirm the exact pack and current availability; 655FC Clear is a separate product.
Can I replace an older 630, 670 or 675 product from the name alone?
No. Confirm the old product and application with our team. 670 Fast Grab and 675 Crystal Fix are marked discontinued on their individual pages.
How do I define the bond before choosing the adhesive?
Name both materials and any paint, coating, laminate or backing film. Decide whether each surface is porous, whether the joint has gaps, and whether it will face load, vibration, movement, weather, water or heat. A product that works on one timber-to-masonry joint may not be suitable for a mirror, flexible plastic, coated metal or continuously wet application.
How do I prepare and assemble the joint?
Confirm the product covers both substrates and the service conditions; Remove dust, grease, moisture, loose coatings and release contamination as directed; Dry-fit the parts and plan supports before applying adhesive; Apply the stated bead, spread or contact method and assemble within the working time; Maintain support and avoid loading until the relevant cure instruction is satisfied.
How do I read limitations before application?
Check excluded plastics, mirrors, polystyrene, permanent immersion, structural use and temperature limits on the exact product. Use the current pack label, Technical Data Sheet and Australian Safety Data Sheet. Where two manufacturer sources disagree, keep both values visible and ask which applies to the supplied formulation.
How do I compare the four products on the required outcome?
Start with whether the joint primarily needs flexible sealing, adhesive strength, fast cure, high initial grab or a clear finish. Then compare substrate coverage, service temperature, cure rate, paint instructions and cleaning method on the exact product page. Do not transfer a figure from one 600 Series formulation to another.
What should I check for my job?
The manufacturer labels these products as discontinued. Their pages are retained as reference information for existing stock and previous installations. Confirm availability and any replacement with us. Select by joint design and substrate, and distinguish current products from retained discontinued-product references; Not for every bead. 650FC’s TDS gives at least 2.5 mm per 24 hours at 23°C and 50% relative humidity. Joint depth, moisture exposure and conditions affect full cure. Do not turn a daily cure-rate figure into a universal 24-hour full-strength claim.
How do I compare the options?
Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.
What should I know about complete bond-planning checklist for Selleys 600 Series?
Write down both substrates, including paint, coatings, laminates, backing films and whether each surface is porous. Define the joint gap, load direction, vibration, movement, water, weather, heat and required finish. These details decide whether the named product is suitable and whether temporary support or permanent mechanical fixing is required.
Which instructions and safety sheets cover this product?
Ready to choose a product? Use the links below for the products featured on this page. Check the exact product, pack and application before you start. Each product has its own directions and limitations. Need help matching a document or checking your job? Contact our team .
Are 670 Fast Grab and 675 Crystal Fix current products?
The manufacturer labels these products as discontinued. Their pages are retained as reference information for existing stock and previous installations. Confirm availability and any replacement with us. Select by joint design and substrate, and distinguish current products from retained discontinued-product references.
Does fast cure mean full strength after 24 hours?
Not for every bead. 650FC’s TDS gives at least 2.5 mm per 24 hours at 23°C and 50% relative humidity. Joint depth, moisture exposure and conditions affect full cure. Do not turn a daily cure-rate figure into a universal 24-hour full-strength claim.