Find a product
Choose a product for your job
Our interactive selector helps you narrow the range using your project details. You can also compare product families and read individual product limitations here.
Information to collect before selecting
- Both materials: identify the substrate, coating, backing and whether the surface is porous.
- Location: interior, sheltered exterior, exposed exterior or wet area.
- Joint behaviour: rigid bond, flexible seal, expected movement or vibration.
- Exposure: weather, intermittent water, permanent immersion, heat, UV, chemicals or food-contact conditions.
- Installation: working time, initial grab, support, mechanical fixing, joint width and depth.
- Finish: colour, visibility, paintability, sanding or staining.
Verify the recommendation
A selector result is the start of the check. Read the exact product page, pack label, Technical Data Sheet and Australian Safety Data Sheet. Confirm surface exclusions and distinguish working time, skin time, support time, paint readiness and full cure.
For safety-critical, structural, fuel-contact, drinking-water, aquarium, food-contact or permanent-immersion work, use only a product whose manufacturer documentation expressly covers the application. Ask Selleys when the published information does not establish suitability.
Browse directly
- Adhesives and glues
- Sealants
- Putty and fillers
- Cleaning and maintenance
- Car care
- Application accessories
Turn the selector result into a job plan
Write down the result together with the product name and pack, then check it against the two materials and the real service conditions. A coated metal, painted timber, laminate, flexible plastic or porous masonry surface can behave differently from the base material named in a selector. If the surface is unknown, identify it or test only as the manufacturer directs before committing to the job.
Decide what the joint must do after cure: carry load, tolerate movement, remain waterproof, resist weather, accept paint, stay clear or allow later sanding and drilling. Also separate the stages of the installation. Working time, open time, initial grab, support removal, skin time, paint readiness and full cure are different milestones.
When to stop and verify
Do not infer suitability for structural work, permanent immersion, aquariums, drinking water, food contact, fuel exposure or high temperatures from a general selector result. Use only a product whose current documentation expressly covers the application. When the documentation is silent or conflicting, contact Selleys with the exact substrates, dimensions, exposure and pack identity.
Prepare before opening the pack
- Read the complete application method and limitations.
- Gather cleaning materials, applicators, masking, supports and protective equipment.
- Confirm temperature, weather and ventilation conditions for the whole cure period.
- Plan how excess material, tools and the empty pack will be handled.
What to check for your job
- Identify it before choosing an adhesive or sealant. Plastics that look similar can have very different bonding behaviour, and coatings can change the effective surface. Both materials: identify the substrate, coating, backing and whether the surface is porous.
- No. Confirm the exact use against the current label and matching technical documentation. Read the exact product page, pack label, Technical Data Sheet and Australian Safety Data Sheet. A selector result is the start of the check.
- Consider whether the materials move differently with temperature, moisture, vibration or load. A rigid adhesive and a flexible sealant solve different joint problems. Joint behaviour: rigid bond, flexible seal, expected movement or vibration. Both materials: identify the substrate, coating, backing and whether the surface is porous.
- It does not automatically mean suitable for permanent immersion, aquariums, drinking water or continuous wet exposure. Check the precise limitation. Exposure: weather, intermittent water, permanent immersion, heat, UV, chemicals or food-contact conditions.
- Only when the exact product says it is paintable and the required cure or paint-over conditions have been met. Confirm surface exclusions and distinguish working time, skin time, support time, paint readiness and full cure.
- Search the Ask an Expert library or contact Selleys with the materials, conditions and pack details. For safety-critical, structural, fuel-contact, drinking-water, aquarium, food-contact or permanent-immersion work, use only a product whose manufacturer documentation expressly covers the application.
How to use Find a product
Start here, then follow our links to the current product, project, contact, competition or supporting document that governs the decision. Dates, availability, eligibility and product formulations can change, so check the linked current information rather than treating an overview as a permanent specification.
For product questions, include the exact name, pack, substrates, dimensions, exposure and desired finish. For promotions or events, read the current terms, dates and eligibility. For company or sustainability claims, rely on the named evidence and its date and scope.
Check the details
- Identify the exact subject and the decision you need to make.
- Open the linked primary page or document.
- Check dates, scope, exclusions and contact details.
- Keep conflicting statements separate and request clarification.
- Record the source used when the decision affects safety, compliance or a warranty.
More help for your project
Use these pages to compare the exact product, method or application that follows from Find a product. A related page is a route into more specific information, not evidence that every product is interchangeable.
- Sustainability and safety resources — Choose the correct product and pack size before opening it, prepare the surface properly, and follow the stated coverage and joint dimensions. These steps reduce failed applications, rework and unused material.
- Adhesive Solutions: Find the Right Selleys Glue — Within the Aquadhere family it runs from nothing to everything. Aquadhere Interior and Aquadhere Exterior are not classified as hazardous under Safe Work Australia GHS 7 — no signal word, no hazard statements.
- Gluing and Sealing a Mirror — Selleys Liquid Nails Mirror & Metal is ideal for this job.
- Sealing between a mirror edge and tiles — Our expert answer identifies Selleys Wet Area Silicone , a neutral-cure product, for the joint between an installed bathroom mirror and surrounding tiles. Check the mirror supplier’s requirements before applying it to the edge.
- How To Refresh a Mirror — An old mirror destined for the scrap heap can be reframed and decorated in an afternoon of work plus three days of curing.
- How To Create a Mirror Frame — The critical measurement in the whole project comes late: you size the mirror from the finished frame, not the other way round.
- Types of Sealants Explained | Find the Right Sealant for Your Project — In this guide, we show you how to plan the job, use our products as directed and get a reliable finish.
- Selleys Complete Clean Glass & Mirror Spray — If your job involves any of those, the answer is a different product, not this one used more carefully.
Where can I use the Selleys product selector?
Open https://www.selleys.com.au/product-selector/ or browse the product categories linked here.
What if I cannot establish that a product suits my job?
Contact our team with the exact materials, conditions and required finish. Use the exact product’s directions and limitations before choosing.
What should I know about information to collect before selecting?
Both materials: identify the substrate, coating, backing and whether the surface is porous; Location: interior, sheltered exterior, exposed exterior or wet area; Joint behaviour: rigid bond, flexible seal, expected movement or vibration; Exposure: weather, intermittent water, permanent immersion, heat, UV, chemicals or food-contact conditions; Installation: working time, initial grab, support, mechanical fixing, joint width and depth; Finish: colour, visibility, paintability, sanding or staining.
How do I verify the recommendation?
A selector result is the start of the check. Read the exact product page, pack label, Technical Data Sheet and Australian Safety Data Sheet. Confirm surface exclusions and distinguish working time, skin time, support time, paint readiness and full cure. For safety-critical, structural, fuel-contact, drinking-water, aquarium, food-contact or permanent-immersion work, use only a product whose manufacturer documentation expressly covers the application.
What should I know about turn the selector result into a job plan?
Write down the result together with the product name and pack, then check it against the two materials and the real service conditions. A coated metal, painted timber, laminate, flexible plastic or porous masonry surface can behave differently from the base material named in a selector.
When to stop and verify?
Do not infer suitability for structural work, permanent immersion, aquariums, drinking water, food contact, fuel exposure or high temperatures from a general selector result. Use only a product whose current documentation expressly covers the application. When the documentation is silent or conflicting, contact Selleys with the exact substrates, dimensions, exposure and pack identity.
How do I prepare before opening the pack?
Read the complete application method and limitations; Gather cleaning materials, applicators, masking, supports and protective equipment; Confirm temperature, weather and ventilation conditions for the whole cure period; Plan how excess material, tools and the empty pack will be handled.
What should I check for my job?
Identify it before choosing an adhesive or sealant. Plastics that look similar can have very different bonding behaviour, and coatings can change the effective surface. Both materials: identify the substrate, coating, backing and whether the surface is porous; No. Confirm the exact use against the current label and matching technical documentation. Read the exact product page, pack label, Technical Data Sheet and Australian Safety Data Sheet. A selector result is the start of the check.
How do I use Find a product?
Start here, then follow our links to the current product, project, contact, competition or supporting document that governs the decision. Dates, availability, eligibility and product formulations can change, so check the linked current information rather than treating an overview as a permanent specification. For product questions, include the exact name, pack, substrates, dimensions, exposure and desired finish.
Which details should I check?
Identify the exact subject and the decision you need to make; Open the linked primary page or document; Check dates, scope, exclusions and contact details; Keep conflicting statements separate and request clarification; Record the source used when the decision affects safety, compliance or a warranty.
What if I do not know what material I am bonding?
Identify it before choosing an adhesive or sealant. Plastics that look similar can have very different bonding behaviour, and coatings can change the effective surface. Both materials: identify the substrate, coating, backing and whether the surface is porous.
Does a selector result guarantee suitability?
No. Confirm the exact use against the current label and matching technical documentation. Read the exact product page, pack label, Technical Data Sheet and Australian Safety Data Sheet. A selector result is the start of the check.