Product
Product Facts
- Product Name
- Complete Clean Glass & Mirror Spray
- Brand
- Selleys
- Category
- Home & Garden > Cleaning Supplies
Complete Clean Glass & Mirror Spray
Selleys Complete Clean Glass & Mirror spray cleaner easily removes dirt, fingerprints and water spots leaving a streak-free finish.
Check the pack details below, then find a retailer near you. Range and availability vary by store.

Product details
Selleys Complete Clean Glass & Mirror spray cleaner easily removes dirt, fingerprints and water spots leaving a streak-free finish.
Complete Clean Glass & Mirror Spray: technical details
| Packaging | Size | ||||
|---|---|---|---|---|---|
| Plastic Spray Bottle | 750mL |
| Property | Typical Result | ||||
|---|---|---|---|---|---|
| Colour | Blue | ||||
| Odour | Mild Solvent | ||||
| Density | ~1.0g/mL | ||||
| pH | ~11 | ||||
| Indicative data only, not intended for preparation of specifications. | |||||
What it does
- Removes dirt, fingerprints, and water spots.
- Leaves a streak-free brilliant shine.
Where to use it
Suitable for use on glass, mirrors, stainless steel, ceramic and porcelain surfaces.
Source: Technical data sheet, page 1.
How to apply
Do not mix with detergents and other Chemicals. Test suitability in a small inconspicuous area first.
- Rotate nozzle to ON position.
- Spray directly on surfaces and then wipe.
- Tip bottle to fill the neck and apply product.
- Rotate nozzle to OFF position when not in use.
Source: Technical data sheet, page 1.
Storage
- Store in a cool, dry, well-ventilated place and out of direct sunlight.
- Store away from foodstuffs.
- Store away from sources of heat and/or ignition.
- Keep container standing upright.
- Keep containers closed when not in use - check regularly for leaks. Limitations/Tips
- Not suitable for use on tinted windows, acrylic surfaces, fiberglass; painted, lacquered or varnished surfaces. Safety Directions:
- Keep out of reach of children.
- Read carefully and follow all instructions.
- Wear protective gloves/clothing including eye/face protection.
- Avoid contact with eye and skin.
- Wash skin thoroughly after handling.
- If in eyes, hold eyes open, flood with water for at least 15 minutes and see a doctor.
- If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water.
- If swelling, redness, blistering or irritation occurs seek medical assistance.
Source: Technical data sheet, page 1.
Safety before you start
Check the product name on your pack against the Australian SDS below before use.
SELLEYS COMPLETE CLEAN GLASS MIRROR SPRAY CLEANER
SDS signal word: Warning.
- Causes serious eye irritation. (H319)
Handling: Avoid eye contact and repeated or prolonged skin contact. Avoid inhalation of vapour, mist or aerosols.
Protective equipment and ventilation
Wear safety shoes, overalls, gloves, safety glasses. Available information suggests that gloves made from nitrile rubber should be suitable for intermittent contact. However, due to variations in glove construction and local conditions, the user should make a final assessment. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storing or re-using.
Ventilation: Ensure ventilation is adequate to maintain air concentrations below Exposure Standards. Use only in well ventilated areas. Use with local exhaust ventilation or while wearing appropriate respirator. Vapour heavier than air - prevent concentration in hollows or sumps. Do NOT enter confined spaces where vapour may have collected.
Australian safety data sheet · issued 8 December 2022 · sections 2, 7 and 8. Read the full SDS for first aid, spill response, incompatibilities and disposal.
SELLEYS COMPLETE CLEAN GLASS & MIRROR: storage and product data
| Pack named in this SDS | Product code | Barcode |
|---|---|---|
| Selleys Glass & Mirror Spray Cleaner 750mL | 103212 | 9300697132406 |
Store between jobs
Store in a cool, dry, well-ventilated place and out of direct sunlight. Store away from foodstuffs. Store away from incompatible materials described in Section 10. Store away from sources of heat and/or ignition. Keep container standing upright. Keep containers closed when not in use - check regularly for leaks.
| Form | Liquid |
|---|---|
| Colour | Blue |
| Odour | Solvent |
| Solubility | Soluble in water |
| Specific Gravity | 1 |
| Relative Vapour Density (air=1) | >1 |
| Vapour Pressure | N Av |
| Flash Point (°C) | N App |
| Explosion/Flammability Limits | N App |
| Autoignition Temperature (°C) | N Av |
| Melting Point/Range (°C) | N Av |
| Boiling Point/Range (°C) | N Av |
| pH | 8 - 9 |
| Viscosity | <20.5 mm²/s @ 40 °C |
| Total VOC (g/Litre) | N Av |
Browse from here
Where this page sits:
- Glass Cleaning Products
- Home Cleaning Products & Cleaning Supplies
- Adhesives, Fillers, Sealants & More
- All Products
- Discover Selleys Product Brands
- Find a product
Elsewhere in this category
Nearby products and groups:
- Bathroom Cleaning Products
- BBQ Grease & Grime Cleaner
- BBQ Tough Clean
- BBQ Tough Wipes
- Best BBQ Grill & Plate Cleaners & BBQ Degreaser
- Best Cleaning Cloths & Multi Purpose Cleaning Cloths
- Complete Clean Bathroom & Shower Spray
- Complete Clean Multi Purpose Spray
- Complete Clean Multi-Surface Floor Cleaner
- Complete Clean Multipurpose Disinfectant Cleaning Wipes
- Complete Clean Power Gel Drain Cleaner
- Complete Clean Toilet Gel
- Dry Lubricant Spray & House Hold Lubricants
- Ezy Glide
Typical values describe the material in this safety data sheet. They are not application instructions or performance guarantees. N Av means not available; N App means not applicable.
Ingredients disclosed in the SDS
CHEMICAL ENTITY CAS NO PROPORTION Amines, C10-16-alkyldimethyl, N-oxides 70592-80-2 <1 % (w/w) Sodium dodecylbenzene sulphonate 25155-30-0 <1 % (w/w) Triethanolamine 102-71-6 <1 % (w/w) Ingredients determined to be non-hazardous or below reporting limits Balance ____________ 100%
These are the ingredients disclosed for hazard communication, not the complete formulation. Use the application instructions to decide suitability for your project.
First aid from the matching SDS
If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131 126, New Zealand 0800 764 766).
Inhalation: Remove victim from exposure - avoid becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until fully recovered. Seek medical advice if effects persist.
Skin Contact: If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. If swelling, redness, blistering or irritation occurs seek medical assistance.
Eye contact: If in eyes, hold eyelids apart and flush the eyes continuously with running water. Continue flushing until advised to stop by the Poisons Information Centre or a Doctor; or for at least 15 minutes and transport to Doctor or Hospital.
Ingestion: Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink. Never give anything by the mouth to an unconscious patient. If vomiting occurs give further water. Seek medical advice.
PPE for First Aiders: Wear safety shoes, overalls, gloves, safety glasses. Available information suggests that gloves made from nitrile rubber should be suitable for intermittent contact. However, due to variations in glove construction and local conditions, the user should make a final assessment. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storing or re-using.
Notes to physician: Treat symptomatically.
Disposal
Persons conducting disposal, recycling or reclamation activities should ensure that appropriate personal protection equipment is used, see "Section 8. Exposure Controls and Personal Protection" of this SDS. If possible material and its container should be recycled. If material or container cannot be recycled, dispose in accordance with local, regional, national and international Regulations.
Australian SDS · sections 1, 3, 4, 7, 9 and 13 · 8 December 2022
Technical and safety documents
The technical data sheet covers application and performance conditions. The safety data sheet covers hazards and safe handling. Use both alongside the pack instructions.
- Technical data sheet — Complete Clean Glass & Mirror Spray
- Australian SDS — SELLEYS COMPLETE CLEAN GLASS MIRROR SPRAY CLEANER · 8 December 2022
Need a hand choosing the right document or checking your application? Contact our team with the product name, pack code, surfaces and intended use.
Which surfaces can I clean?
Glass, mirrors, stainless steel, ceramic and porcelain. Test in a small, inconspicuous area first.
Can I use it on tinted windows or acrylic?
No. Do not use on tinted windows, acrylic, fibreglass, or painted, lacquered or varnished surfaces.
How do I use the spray?
Before starting, check your exact pack and ask our team to confirm its dispensing method. Our online directions describe spraying and wiping; our technical data sheet also says to tip the bottle to fill its neck. Once the spray method is confirmed for your pack: pre-test a suitable surface, turn the nozzle to ON, spray and wipe, then turn the nozzle to OFF.
Can I mix it with another cleaner?
No. Do not mix with detergents or other chemicals.
What protection do I need?
Wear protective gloves and clothing, including eye/face protection. The SDS specifies safety shoes, overalls, gloves and safety glasses, plus its ventilation requirements. Avoid contact and inhalation of vapour, mist or aerosols.
What is its pH?
Our September 2024 technical data sheet lists approximately 11; the December 2022 SDS lists 8–9. Contact our team to confirm the appropriate value before using it in a specification.
What size is it?
It comes in a 750 mL plastic spray bottle. The SDS identifies product code 103212 and barcode 9300697132406.
How should I store it?
Keep upright and closed in a cool, dry, well-ventilated place out of sunlight, away from foodstuffs, heat, ignition sources and oxidising agents. Check regularly for leaks and keep out of reach of children.
What are the key product details?
Selleys Complete Clean Glass & Mirror spray cleaner easily removes dirt, fingerprints and water spots leaving a streak-free finish. Removes dirt, fingerprints, and water spots; Leaves a streak-free brilliant shine.
How do I apply it?
Do not mix with detergents and other Chemicals. Test suitability in a small inconspicuous area first. Rotate nozzle to ON position; Spray directly on surfaces and then wipe; Tip bottle to fill the neck and apply product; Rotate nozzle to OFF position when not in use.
What should I know about safety before I start?
Check the product name on your pack against the Australian SDS below before use. Handling: Avoid eye contact and repeated or prolonged skin contact. Avoid inhalation of vapour, mist or aerosols. Wear safety shoes, overalls, gloves, safety glasses. Available information suggests that gloves made from nitrile rubber should be suitable for intermittent contact.
Which technical and safety documents are available?
The technical data sheet covers application and performance conditions. The safety data sheet covers hazards and safe handling. Use both alongside the pack instructions. Need a hand choosing the right document or checking your application? Contact our team with the product name, pack code, surfaces and intended use.