Adhesives, Fillers, Sealants & More
Choose by the job requirements
For an adhesive, identify both substrates, whether either surface is porous, the load, the joint gap, the required working time and whether temporary support or mechanical fixing is needed. Initial grab, support removal and full cure are different milestones.
For a sealant or filler, establish the joint width and depth, expected movement, water exposure, required finish and whether the product must be painted. A water-resistant filler is not automatically a waterproof sanitary seal, and an elongation-at-break result is not automatically a rated movement capability.
For cleaners and maintenance products, check the surface exclusions, dilution, required contact time, ventilation and personal protective equipment. Test delicate, coated or unknown surfaces in an inconspicuous area.
Browse by trade or application
Product families
- Glues and adhesives — construction adhesives, epoxy, super glue, wood glue and specialist products.
- Sealants — products for wet areas, roofs and gutters, glazing, construction joints and general sealing.
- Putty and fillers — flexible gap fillers, rigid repair compounds, wall fillers and timber products.
- Cleaning and maintenance — bathroom, mould, outdoor, surface and household maintenance products.
- Car care — washing, polishing, protecting, lubricating and degreasing products.
- Paint and wallpaper preparation — products used before decorating.
- Application accessories — applicators and tools used with cartridges and sausage packs.
Browse our products
This index organises our range by product family, trade and application. Start with the kind of task you need to complete, then use the individual product page to check materials, preparation, application, curing, limitations and safety information.
Documents and source checks
Before use, read the current pack label and the matching Technical Data Sheet and Australian Safety Data Sheet. Our product pages link statements to the relevant source documents. Where retail pages and dated documents disagree, the difference is shown instead of being silently resolved.
- Browse all products
- Browse brand guides
- Request current technical documents and safety data sheets
- Find a stockist
Move from a category to a defensible product choice
Use the category pages to build a shortlist, then compare the exact products. Record both materials, any paint or coating, the size and shape of the joint or repair, indoor or outdoor exposure, water and heat, movement, load and the finish you need. Those facts decide whether you need an adhesive, a flexible sealant, a rigid filler, a cleaner or a preparation product.
For bonding work, separate initial grab from support time and full cure. For sealing work, confirm joint width and depth, expected movement, cure type and paintability. For fillers, decide whether the repair is decorative or load-bearing and whether it must be sanded, drilled or painted. For cleaning, check the soil, surface, dilution, contact time, ventilation and rinsing directions.
Check the exact product before use
A range or trade category cannot establish suitability on its own. Open the product page and read its limitations before buying. Confirm the current pack label, Technical Data Sheet and Australian Safety Data Sheet for the supplied formulation. Where the retail page and a dated document differ, keep the statements separate and ask Selleys which one applies.
- Prepare the surface exactly as directed and remove dust, grease, moisture and loose material.
- Plan the working time, tools, masking, supports and personal protective equipment before opening the pack.
- Apply within the stated temperature, bead, joint or coverage limits.
- Do not load, wet, paint, sand or otherwise disturb the work until the relevant milestone has been reached.
What to check for your job
- Compare the exact materials, exposure, movement, load, working time, cure requirements and stated limitations. Do not rely on the shared range name. For an adhesive, identify both substrates, whether either surface is porous, the load, the joint gap, the required working time and whether temporary support or mechanical fixing is needed. Initial grab, support removal and full cure are different milestones.
- No. Initial grab, temporary-support time and full cure describe different stages. Follow the exact product instructions before loading the joint. Initial grab, support removal and full cure are different milestones. For an adhesive, identify both substrates, whether either surface is porous, the load, the joint gap, the required working time and whether temporary support or mechanical fixing is needed.
- No. Silicone sealants are generally not paintable, while paintable fillers have paint-specific waiting conditions. Check the product page and matching data sheet. For a sealant or filler, establish the joint width and depth, expected movement, water exposure, required finish and whether the product must be painted.
- Use our brand guides for ranges including Liquid Nails, No More Gaps, Wet Area Silicone and the 600 Series.
- No. Exterior suitability, weather resistance and permanent-immersion limits are product-specific. Sheltered exterior use is different from continuous water exposure. For a sealant or filler, establish the joint width and depth, expected movement, water exposure, required finish and whether the product must be painted.
- Review the Ask an Expert library and contact Selleys when the materials, load or exposure are not covered by the published product instructions. Start with the kind of task you need to complete, then use the individual product page to check materials, preparation, application, curing, limitations and safety information.
How to use Adhesives, Fillers, Sealants & More
Start here, then follow our links to the current product, project, contact, competition or supporting document that governs the decision. Dates, availability, eligibility and product formulations can change, so check the linked current information rather than treating an overview as a permanent specification.
For product questions, include the exact name, pack, substrates, dimensions, exposure and desired finish. For promotions or events, read the current terms, dates and eligibility. For company or sustainability claims, rely on the named evidence and its date and scope.
Check the details
- Identify the exact subject and the decision you need to make.
- Open the linked primary page or document.
- Check dates, scope, exclusions and contact details.
- Keep conflicting statements separate and request clarification.
- Record the source used when the decision affects safety, compliance or a warranty.
More help for your project
Use these pages to compare the exact product, method or application that follows from Adhesives, Fillers, Sealants & More. A related page is a route into more specific information, not evidence that every product is interchangeable.
- Caulking, Silicon & Sealant Guns — Selleys accessories are the application tools rather than the chemistry: the caulking, silicone and sealant guns you use to get a cartridge or a sausage of product out where you want it.
- All Products — Sealants covers the products that stay flexible and keep water out, split by application — wet area , glass , roofing , construction , automotive , fire-rated and multi-purpose .
- Building Products — This is the Selleys Trade building products category — the adhesives, fillers and sealants aimed at trade professionals working on common building substrates rather than at household repairs.
- Car Care & Cleaning — The one distinction that decides most purchases is whether you want to clean or to protect . A wash removes road grime; a wax or protectant leaves a layer behind.
- Carpentry Products — Carpentry is one of several trade-based entry points we use to organise the same catalogue.
- Home Cleaning Products & Cleaning Supplies — We help you choose and use our products with clear directions, limitations and technical information for the job.
- Flooring Products — Selleys VBS Vapour Barrier is a highly cross-linked, two-pack epoxy moisture vapour barrier system. This is the product that addresses moisture rising out of a concrete substrate before a timber floor goes over it.
- Glazing Products — Two of our product categories are the natural next step for a glazing job:
Where should I start when choosing a Selleys product?
Choose a product family or trade application, then check the exact product against the materials and job. Our product selector and help team can also assist.
Does the product index include tiling?
Yes. Tiling has its own product-family link as well as a trade-application route.
How do I choose by the job requirements?
For an adhesive, identify both substrates, whether either surface is porous, the load, the joint gap, the required working time and whether temporary support or mechanical fixing is needed. Initial grab, support removal and full cure are different milestones. For a sealant or filler, establish the joint width and depth, expected movement, water exposure, required finish and whether the product must be painted.
What should I know about product families?
Glues and adhesives — construction adhesives, epoxy, super glue, wood glue and specialist products; Sealants — products for wet areas, roofs and gutters, glazing, construction joints and general sealing; Putty and fillers — flexible gap fillers, rigid repair compounds, wall fillers and timber products; Cleaning and maintenance — bathroom, mould, outdoor, surface and household maintenance products; Car care — washing, polishing, protecting, lubricating and degreasing products; Paint and wallpaper preparation — products used before decorating; Application accessories — applicators and tools used with cartridges and sausage packs.
What should I know about browse our products?
This index organises our range by product family, trade and application. Start with the kind of task you need to complete, then use the individual product page to check materials, preparation, application, curing, limitations and safety information.
What should I know about documents and source checks?
Before use, read the current pack label and the matching Technical Data Sheet and Australian Safety Data Sheet. Our product pages link statements to the relevant source documents. Where retail pages and dated documents disagree, the difference is shown instead of being silently resolved.
What should I know about move from a category to a defensible product choice?
Use the category pages to build a shortlist, then compare the exact products. Record both materials, any paint or coating, the size and shape of the joint or repair, indoor or outdoor exposure, water and heat, movement, load and the finish you need. Those facts decide whether you need an adhesive, a flexible sealant, a rigid filler, a cleaner or a preparation product.
How do I check the exact product before use?
A range or trade category cannot establish suitability on its own. Open the product page and read its limitations before buying. Confirm the current pack label, Technical Data Sheet and Australian Safety Data Sheet for the supplied formulation. Where the retail page and a dated document differ, keep the statements separate and ask Selleys which one applies.
How do I use Adhesives, Fillers, Sealants & More?
Start here, then follow our links to the current product, project, contact, competition or supporting document that governs the decision. Dates, availability, eligibility and product formulations can change, so check the linked current information rather than treating an overview as a permanent specification. For product questions, include the exact name, pack, substrates, dimensions, exposure and desired finish.
Which details should I check?
Identify the exact subject and the decision you need to make; Open the linked primary page or document; Check dates, scope, exclusions and contact details; Keep conflicting statements separate and request clarification; Record the source used when the decision affects safety, compliance or a warranty.
How do I choose between products in the same range?
Compare the exact materials, exposure, movement, load, working time, cure requirements and stated limitations. Do not rely on the shared range name. For an adhesive, identify both substrates, whether either surface is porous, the load, the joint gap, the required working time and whether temporary support or mechanical fixing is needed. Initial grab, support removal and full cure are different milestones.
Does fast grab mean immediate full strength?
No. Initial grab, temporary-support time and full cure describe different stages. Follow the exact product instructions before loading the joint. Initial grab, support removal and full cure are different milestones. For an adhesive, identify both substrates, whether either surface is porous, the load, the joint gap, the required working time and whether temporary support or mechanical fixing is needed.