Technical Documents
What are Technical Documents, and how do you use them?
This page is our technical documents library — a searchable, downloadable list of the technical data sheets for our products. It has a search box, a "show more" control that reveals the list in pages, and tick boxes so you can select several documents and download them together as a single zip file.
The list is generated dynamically, so the documents shown are not fixed and we do not reproduce them. Use the search box on the page itself to find the product you need; if nothing matches, the page will say so.
What a technical data sheet tells you
A technical data sheet (TDS) is the manufacturer's statement of how a product performs. It is the document to consult when you are choosing between two products, or when you need to know how long to leave a job before loading it. For our product, expect it to cover:
- Technology — the chemistry: acetic or neutral cure silicone, polyurethane, hybrid/SMP, PVA, epoxy, solvent-based contact adhesive. This is what determines most of the product's behaviour.
- Skin time and cure rate — for example, a silicone that skins in 5 to 10 minutes and cures at 2mm per 24 hours.
- Working time and bond development — for adhesives, the minutes you have after mixing, the initial bond time, and when maximum strength is reached.
- Joint movement capability — the percentage of the joint width a cured sealant can absorb, such as ±25% or ±50%.
- Service temperature range — the band the cured product is rated to work in.
- Substrates — what it will bond to, and what it will not.
- Coverage, packaging, directions and clean up.
- Limitations — the section that matters most, and the one most often skipped.
Read the limitations first
The limitations section is where a data sheet tells you what will go wrong, and it is usually short and specific. Examples from across our range:
- A wet area silicone that is not suitable for permanent water immersion, despite its name.
- A silicone that is not paintable, with a requirement that painting be completed seven days before the sealant is applied.
- A construction adhesive that should not be the sole bonding agent in a structural application.
- An epoxy that will not bond PTFE, polyethylene or polypropylene, and whose bond softens above 60°C.
- An expanding foam that must not be left permanently exposed to sunlight.
- An exterior wood adhesive that is for non-structural use and not for continuous submersion.
Every one of those is the difference between a job that lasts and a job that has to be done twice, and none of them is obvious from the pack.
Figures are indicative
Technical data sheets state their figures as indicative results obtained under stated laboratory conditions — commonly 23°C and 50% relative humidity — and not as a basis for preparing specifications. Cold slows every cure, clamp and set time; humidity slows moisture-curing silicones one way and water-based fillers the other; a deeper bead takes proportionally longer; and adhesive strengths quoted per square centimetre depend entirely on how much properly prepared surface you have joined.
Using this page
- Search by product name as it appears on the pack. The search filters the list as you type.
- Use "show more" to reveal further results — the list loads in pages.
- Tick several documents to take them as one zip, or use the control on each row for a single sheet.
Which document answers which question
| Question | Document |
|---|---|
| How long until I can use the shower / drive the car / load the joint? | Technical data sheet |
| Will it bond to this material? | Technical data sheet |
| Can I paint over it? | Technical data sheet |
| How much movement will the joint take? | Technical data sheet |
| Is it hazardous, and how do I handle and store it? | Safety data sheet |
| What is the first aid response? | Safety data sheet |
| Has it been tested to a standard such as AS1530.4-2014? | Test certificate |
Do not work from a similar product's data. An acetic cure silicone and a neutral cure silicone look identical in a cartridge and behave differently on stone and mirror. If the document is missing, ask through contact us.
Related pages
Related questions and guides
More pages in this section:
- About Selleys
- Adhesives, Fillers, Sealants & More
- Ask an Expert
- Competitions and Giveaways
- Contact and subscription confirmation
- Contact Selleys
- DIY Living Room Project Ideas and Guides
- Find a product
Browse from here
Where this page sits:
Where can I find a Selleys technical data sheet?
Choose the named document from this page or search by the full product name at https://www.selleys.com.au/technical-documents/. Check the variant, colour or component where specified.
Can I use one product’s cure time for another product?
No. Use the exact product’s technical data sheet and pack directions. Keep working time, support removal, painting and full cure separate, with the conditions attached to each figure.
What should I do if a document name does not match my pack?
Contact our team at https://www.selleys.com.au/contact-us/ with the full product name and pack details. Do not substitute a similarly named product’s sheet.
Where is the safety information?
Use the matching safety data sheet at https://www.lupinsys.com/search/selleys/. For two-part products, check both components.
What are Technical Documents, and how do you use them?
This page is our technical documents library — a searchable, downloadable list of the technical data sheets for our products. It has a search box, a "show more" control that reveals the list in pages, and tick boxes so you can select several documents and download them together as a single zip file.
How do I read the limitations first?
The limitations section is where a data sheet tells you what will go wrong, and it is usually short and specific. Examples from across our range: Every one of those is the difference between a job that lasts and a job that has to be done twice, and none of them is obvious from the pack.
What should I know about figures are indicative?
Technical data sheets state their figures as indicative results obtained under stated laboratory conditions — commonly 23°C and 50% relative humidity — and not as a basis for preparing specifications. Cold slows every cure, clamp and set time; humidity slows moisture-curing silicones one way and water-based fillers the other; a deeper bead takes proportionally longer; and adhesive strengths quoted per square centimetre depend entirely on how much properly prepared surface you have joined.
What should I know about using this page?
Search by product name as it appears on the pack. The search filters the list as you type; Use "show more" to reveal further results — the list loads in pages; Tick several documents to take them as one zip, or use the control on each row for a single sheet.
Which document answers which question?
Do not work from a similar product's data. An acetic cure silicone and a neutral cure silicone look identical in a cartridge and behave differently on stone and mirror. If the document is missing, ask through contact us .
Which part should I read first?
The limitations. That is where the product tells you what it must not be used on and what it must not be used for. The limitations section is where a data sheet tells you what will go wrong, and it is usually short and specific. An expanding foam that must not be left permanently exposed to sunlight.
When was Selleys founded, and by whom?
We were founded in 1939 in Sydney, Australia, by Martin Selley.
What is Selleys' relationship to DuluxGroup?
We are part of DuluxGroup (Australia) Pty Ltd.