Product
Product Facts
- Product Name
- Polyglaze Liquid Polish
- Brand
- Selleys
- Category
- Automotive > Car Care & Detailing
Polyglaze Liquid Polish
Selleys Polyglaze Liquid Polish gives your car an instant shine and long lasting finish with no hard rubbing or buffing required. It is very easy to use: simply apply, allow to dry and wipe off. No hard rubbing or buffing needed.
Check the pack details below, then find a retailer near you. Range and availability vary by store.

Product details
| Pack Size | 500mL bottle |
|---|
Polyglaze Liquid Polish: technical details
What it does
- Instant, long lasting shine
- Easy Application
- No hard rubbing or buffing required
How to apply
Suitable for use on all vehicles.
Source: Technical data sheet, page 1.
How to apply
- Washvehiclein acool, shaded area–thenhoseoff
- Leave the vehicle wet, then pour product onto microfiber cloth
- Apply product to one panel at a time wiping over the surface. Use a clean microfiber cloth for the final wipe off for an instant shine
- Do not let product self-dry on the surface.
Source: Technical data sheet, page 1.
Storage
Store in a cool, dry, well ventilated area out of direct sunlight. Store away from foodstuffs. Ensure bottle is tightly sealed when not in use.
Source: Technical data sheet, page 1.
Limitations
- Avoid contact with skin and eyes
- Use in well ventilated area
Source: Our product directions.
Safety before you start
Check the product name on your pack against the Australian SDS below before use.
SELLEYS POLYGLAZE LIQUID POLISH
The Australian SDS does not classify this material as hazardous under its stated classification criteria. Follow the handling and protective measures in the SDS.
Handling: Avoid eye contact and repeated or prolonged skin contact. Avoid inhalation of vapour, mist or aerosols.
Protective equipment and ventilation
Wear safety shoes, overalls, gloves, safety glasses. Available information suggests that gloves made from nitrile rubber should be suitable for intermittent contact. However, due to variations in glove construction and local conditions, the user should make a final assessment. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storing or re-using.
Ventilation: Natural ventilation should be adequate under normal use conditions.
Australian safety data sheet · issued 22 September 2022 · sections 2, 7 and 8. Read the full SDS for first aid, spill response, incompatibilities and disposal.
POLYGLAZE LIQUID POLISH: storage and product data
Store between jobs
Store in a cool, dry, well-ventilated place and out of direct sunlight. Store away from foodstuffs. Store away from incompatible materials described in Section 10. Store away from sources of heat and/or ignition. Keep container standing upright. Keep containers closed when not in use - check regularly for leaks.
| Form | Liquid |
|---|---|
| Colour | White |
| Odour | Characteristic |
| Solubility | Soluble in water |
| Specific Gravity | 0.87 - 1.05 |
| Relative Vapour Density (air=1) | >1 |
| Vapour Pressure | N Av |
| Flash Point (°C) | N App |
| Flammability Limits (%) | N App |
| Autoignition Temperature (°C) | N Av |
| Melting Point/Range (°C) | N Av |
| Boiling Point/Range (°C) | N Av |
| pH | N Av |
| Viscosity | >20.5 mm²/s @ 40 °C |
| Total VOC (g/Litre) | N Av |
Others in this range
Alongside this product:
- Engine Degreasers & Lubricants
- Polyglaze Auto Protectant Wipes
- Polyglaze Drying Towel
- Polyglaze Exterior Car Care Kit
- Polyglaze Glass Cleaner
- Polyglaze Heavy Duty Wash & Wax Hose On
- Polyglaze Interior Protectant
- Polyglaze Microfibre Cloth
- Polyglaze Plush Pile Mitt
- Polyglaze Spray Wax
- Polyglaze Tyre Shine
- Polyglaze Universal Wheel Brush
- Polyglaze Wash & Wax
- Polyglaze Wheel Cleaner
Browse from here
Where this page sits:
Typical values describe the material in this safety data sheet. They are not application instructions or performance guarantees. N Av means not available; N App means not applicable.
Ingredients disclosed in the SDS
CHEMICAL ENTITY CAS NO PROPORTION Ingredients determined to be non-hazardous or below reporting limits 100 % (w/w) ____________ 100%
These are the ingredients disclosed for hazard communication, not the complete formulation. Use the application instructions to decide suitability for your project.
First aid from the matching SDS
If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131 126, New Zealand 0800 764 766).
Inhalation: Remove victim from exposure - avoid becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until fully recovered. Seek medical advice if effects persist.
Skin Contact: If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. If swelling, redness, blistering or irritation occurs seek medical assistance.
Eye contact: If in eyes wash out immediately with water. In all cases of eye contamination it is a sensible precaution to seek medical advice.
Ingestion: Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink. Never give anything by the mouth to an unconscious patient. If vomiting occurs give further water. Seek medical advice.
PPE for First Aiders: Wear safety shoes, overalls, gloves, safety glasses. Available information suggests that gloves made from nitrile rubber should be suitable for intermittent contact. However, due to variations in glove construction and local conditions, the user should make a final assessment. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storing or re-using.
Notes to physician: Treat symptomatically.
Disposal
Persons conducting disposal, recycling or reclamation activities should ensure that appropriate personal protection equipment is used, see "Section 8. Exposure Controls and Personal Protection" of this SDS. If possible material and its container should be recycled. If material or container cannot be recycled, dispose in accordance with local, regional, national and international Regulations.
Australian SDS · sections 1, 3, 4, 7, 9 and 13 · 22 September 2022
Technical and safety documents
The technical data sheet covers application and performance conditions. The safety data sheet covers hazards and safe handling. Use both alongside the pack instructions.
- Technical data sheet — Polyglaze Liquid Polish
- Australian SDS — SELLEYS POLYGLAZE LIQUID POLISH · 22 September 2022
Need a hand choosing the right document or checking your application? Contact our team with the product name, pack code, surfaces and intended use.
Should I let Liquid Polish dry before wiping it off?
No. Do not let the product self-dry on the surface. Apply to a wet vehicle one panel at a time and use a clean microfibre cloth for the final wipe-off.
How do I prepare the vehicle?
Wash it in a cool, shaded area and hose it off. Leave the vehicle wet before applying the polish.
Do I need to rub or buff hard?
No hard rubbing or buffing is required.
What size is the bottle?
It is listed as 500mL. Range and availability vary by store, so check the exact pack in front of you, and follow that pack for any additional directions.
What precautions apply?
Avoid skin and eye contact and inhalation of vapour, mist or aerosols. Use in a well-ventilated area. Follow the Australian SDS for protective equipment, hygiene and first aid.
What specific gravity applies?
The March 2023 TDS gives 0.98–1.05. The September 2022 SDS gives a typical range of 0.87–1.05. These are separate document values; ask our team for a pack-specific specification rather than treating them as one value.
Where are the directions and safety sheet?
TDS March 2023: https://www.selleys.com.au/media/oxki1r0b/selleys-polyglaze-liquid-polish-tds.pdf . Australian SDS version 1.0, 22 September 2022: https://go.lupinsys.com/duluxgroup/harms/public/materials/bd2b4a9246f9724ca1edaba70c389778-published/attachments_api/8d140313d3cb9a154da2f3331d85b57f/individual_api/SELLEYS_POLYGLAZE_LIQUID_POLISH-AUS_GHS.pdf
Where can I buy it?
Use our find-a-store page at https://www.selleys.com.au/find-a-store/ to locate a stockist near you. Range and availability vary by store, so check the exact pack with the retailer before you buy.
How do I apply it?
Washvehiclein acool, shaded area–thenhoseoff; Leave the vehicle wet, then pour product onto microfiber cloth; Apply product to one panel at a time wiping over the surface. Use a clean microfiber cloth for the final wipe off for an instant shine; Do not let product self-dry on the surface.
How should I store it?
Store in a cool, dry, well ventilated area out of direct sunlight. Store away from foodstuffs. Ensure bottle is tightly sealed when not in use.
What should I know about safety before I start?
Check the product name on your pack against the Australian SDS below before use. The Australian SDS does not classify this material as hazardous under its stated classification criteria. Follow the handling and protective measures in the SDS. Handling: Avoid eye contact and repeated or prolonged skin contact.
Which technical and safety documents are available?
The technical data sheet covers application and performance conditions. The safety data sheet covers hazards and safe handling. Use both alongside the pack instructions. Need a hand choosing the right document or checking your application? Contact our team with the product name, pack code, surfaces and intended use.