Carpentry Products
What this category covers
Carpentry is one of several trade-based entry points we use to organise the same catalogue. The others in the same set include building, flooring, glazing, plastering, plumbing, roofing, tiling and waterproofing. These are ways into the range by the job you are doing rather than by the chemistry of the product.
The same products are also organised by what they are, which is often the faster way to find something when you already know the type of product you need.
Where to look instead
- Wood glue — the adhesives category for timber work.
- Construction adhesives — for bonding building materials and fixing components in place.
- Wood putty and wall fillers — for filling and making good before finishing.
- Gap fillers — for the joints between timber, panels and fittings.
- Sealants — where a joint needs to stay flexible or keep water out.
- Accessories — caulking and sausage guns for applying cartridge and sausage products.
What is on the Selleys Carpentry products page?
This is the carpentry section of the Selleys Trade range — We describe it simply as carpentry products for trade professionals. The product listing itself is loaded dynamically on the live page and could not be captured, so we cannot honestly tell you which products currently sit under it. Rather than guess, what follows is an accurate account of what the page is and where to look instead.
If you have arrived here looking for a specific product, the reliable route is either the full product listing, which can be filtered by technology, product category and what the product is best for, or the product-type categories below.
Define the bond before choosing the adhesive
Name both materials and any paint, coating, laminate or backing film. Decide whether each surface is porous, whether the joint has gaps, and whether it will face load, vibration, movement, weather, water or heat. A product that works on one timber-to-masonry joint may not be suitable for a mirror, flexible plastic, coated metal or continuously wet application.
Compare working time, repositioning time, initial grab, required bead pattern, temporary support and full cure. A fast-grab or rapid-setting statement does not mean immediate full strength. Heavy, stressed and overhead work may require support or mechanical fixing even when the adhesive has a high initial grab.
Prepare and assemble the joint
- Confirm the product covers both substrates and the service conditions.
- Remove dust, grease, moisture, loose coatings and release contamination as directed.
- Dry-fit the parts and plan supports before applying adhesive.
- Apply the stated bead, spread or contact method and assemble within the working time.
- Maintain support and avoid loading until the relevant cure instruction is satisfied.
Read limitations before application
Check excluded plastics, mirrors, polystyrene, permanent immersion, structural use and temperature limits on the exact product. Use the current pack label, Technical Data Sheet and Australian Safety Data Sheet. Where two manufacturer sources disagree, keep both values visible and ask which applies to the supplied formulation.
What to check for your job
- A separate product listing is not available here. Use the linked categories to check the current range. If you have arrived here looking for a specific product, the reliable route is either the full product listing, which can be filtered by technology, product category and what the product is best for, or the product-type categories below.
- Aquadhere Exterior is an industrial-grade polyaliphatic cross-linking PVA adhesive developed for professional woodworkers and craftsmen. It is ideal for exterior woodworking projects including dowelling, joinery, laminating, veneering, and cabinet and furniture making. It produces bonds stronger than most woods, is weatherproof, and surfaces bonded with it can be chiselled, routed, or turned after application.
- Aquadhere Durabond is a solvent-free, moisture-curing polyurethane wood glue suitable for both interior and exterior applications, ideal for furniture making, timber joinery, marine applications, and general repairs. It bonds wood to almost anything and is easily sandable, paintable, and stainable. Wood glue — the adhesives category for timber work. Wood putty and wall fillers — for filling and making good before finishing.
- Liquid Nails Timberflex is a flexible, trowel-grade adhesive suitable for most types of solid, engineered strip and sheet timber flooring to concrete and timber substrates.
- No More Cracks Wood Filler Interior is a ready-to-use filler that gives a superior, durable finish on interior timber. It is stainable, paintable, and can be nailed or planed, making it suitable for interior carpentry repairs. Wood glue — the adhesives category for timber work. Wood putty and wall fillers — for filling and making good before finishing.
- The No More Cracks RTU Wood Filler is a ready-mixed filler designed to prepare wood for painting or varnishing, ideal for finishing carpentry work. Wood glue — the adhesives category for timber work. Wood putty and wall fillers — for filling and making good before finishing.
Compare the options: Carpentry Products
Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.
- Suitability: both substrates, coatings and service conditions.
- Application: preparation, tools, dimensions, coverage and working time.
- Waiting: support removal, water exposure, sanding, painting and full cure.
- Finish: colour, visibility, flexibility, paintability and clean-up.
- Evidence: the current pack, Technical Data Sheet and Australian Safety Data Sheet.
Open the individual page for every shortlisted product. Where this category contains a retained discontinued page, use it to identify older stock or work and confirm current availability or a replacement directly with us.
Before you start: Carpentry Products
Start with the exact task, materials, exposure and finish. Record what the product must do, where it will be used, what it must contact, and what can happen if it is unsuitable. Compare those facts with the current product page, pack label and technical documentation.
- Read the complete method and limitations before opening the pack.
- Prepare surfaces, tools, supports and personal protective equipment.
- Confirm temperature, ventilation and weather conditions for application and cure.
- Keep within the stated dimensions, coverage, working time and waiting periods.
- Stop and obtain advice when the intended use is not expressly covered.
Range names and broad category labels are useful for finding options, but only the exact product instructions establish compatibility and use.
Details to check before you choose
- We were founded by Martin Selley in Sydney, Australia, in 1939.
- Our parent organization is DuluxGroup (Australia) Pty Ltd.
Where can I find products for timber bonding?
Browse our wood-glue range and check the exact product against your timber, joint and exposure.
Does a carpentry-category listing establish structural suitability?
No. Check the exact product’s stated uses and limitations for your joint.
What does this category cover?
Carpentry is one of several trade-based entry points we use to organise the same catalogue. The others in the same set include building , flooring , glazing , plastering , plumbing , roofing , tiling and waterproofing . These are ways into the range by the job you are doing rather than by the chemistry of the product.
Where to look instead?
Wood glue — the adhesives category for timber work; Construction adhesives — for bonding building materials and fixing components in place; Wood putty and wall fillers — for filling and making good before finishing; Gap fillers — for the joints between timber, panels and fittings; Sealants — where a joint needs to stay flexible or keep water out; Accessories — caulking and sausage guns for applying cartridge and sausage products.
What is on the Selleys Carpentry products page?
This is the carpentry section of the Selleys Trade range — We describe it simply as carpentry products for trade professionals. The product listing itself is loaded dynamically on the live page and could not be captured, so we cannot honestly tell you which products currently sit under it.
How do I define the bond before choosing the adhesive?
Name both materials and any paint, coating, laminate or backing film. Decide whether each surface is porous, whether the joint has gaps, and whether it will face load, vibration, movement, weather, water or heat. A product that works on one timber-to-masonry joint may not be suitable for a mirror, flexible plastic, coated metal or continuously wet application.
How do I prepare and assemble the joint?
Confirm the product covers both substrates and the service conditions; Remove dust, grease, moisture, loose coatings and release contamination as directed; Dry-fit the parts and plan supports before applying adhesive; Apply the stated bead, spread or contact method and assemble within the working time; Maintain support and avoid loading until the relevant cure instruction is satisfied.
How do I read limitations before application?
Check excluded plastics, mirrors, polystyrene, permanent immersion, structural use and temperature limits on the exact product. Use the current pack label, Technical Data Sheet and Australian Safety Data Sheet. Where two manufacturer sources disagree, keep both values visible and ask which applies to the supplied formulation.
What should I check for my job?
A separate product listing is not available here. Use the linked categories to check the current range. If you have arrived here looking for a specific product, the reliable route is either the full product listing, which can be filtered by technology, product category and what the product is best for, or the product-type categories below; Aquadhere Exterior is an industrial-grade polyaliphatic cross-linking PVA adhesive developed for professional woodworkers and craftsmen. It is ideal for exterior woodworking projects including dowelling, joinery, laminating, veneering, and cabinet and furniture making. It produces bonds stronger than most woods, is weatherproof, and surfaces bonded with it can be chiselled, routed, or turned after application.
How do I compare the options?
Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.
What should I know about before you start?
Start with the exact task, materials, exposure and finish. Record what the product must do, where it will be used, what it must contact, and what can happen if it is unsuitable. Compare those facts with the current product page, pack label and technical documentation.
Where can I find the individual products for this category?
A separate product listing is not available here. Use the linked categories to check the current range. If you have arrived here looking for a specific product, the reliable route is either the full product listing, which can be filtered by technology, product category and what the product is best for, or the product-type categories below.