Waterproofing Products
Compare the products below with your materials, conditions and the finish you need.
What do we list under waterproofing, and where should you look next?
For waterproofing information, one product to explore is Selleys Wet Area Matt White Silicone — along with the related sealing categories below. A separate waterproofing product listing is not available here.
The distinction worth holding on to before you go further: sealing a joint and waterproofing a substrate are different jobs. A sealant closes the line between two surfaces. A waterproofing membrane treats the surface itself. Our products reachable from here are sealants, and they are chosen by where the joint is, not by how much water it sees.
What this category covers
This page helps trade professionals find waterproofing product information. A separate product listing is not available here.
The product the catalogue associates with waterproofing
Selleys Wet Area Matt White Silicone
Wet Area Matt White Silicone is described as offering a premium matte finish with strong waterproofing for wet areas, suited to modern bathrooms, combining appearance with sealing performance.
The matte finish is the part that distinguishes it from the rest of the wet area range. Most silicone cures to a slight sheen, which reads as a visible line against a matte tile, matte grout or a flat-painted wall. A matte sealant disappears into that kind of finish instead. If your bathroom is specified in matte materials, this is the reason to choose this product over another wet area silicone with equivalent sealing performance.
It sits in the wet area silicone range, which is where the rest of the bathroom, kitchen and laundry sealants are listed.
Where to look for sealing products
- Sealants — the parent category covering the full our sealing range.
- Wet area silicone — sealants for showers, bathrooms, kitchens and laundries.
- Roofing silicone — roof and gutter sealants, including products described for application to wet surfaces.
- Construction silicone — sealants for brick, concrete and structural joints.
Separate repair, sealing and waterproofing requirements
Define the materials, the source and pressure of any water, whether the area is intermittently wet or continuously immersed, and whether the repair is part of a regulated plumbing or waterproofing system. A product associated with plumbing or wet areas is not automatically approved for drinking water, permanent immersion, pressurised service or use as a complete waterproofing membrane.
Check the exact product for substrate compatibility, preparation, application depth, cure, temperature and service limits. Decide whether the repair must remain flexible or become rigid, and whether it will be hidden, painted, drilled or loaded after cure.
Prepare before applying
- Stop the leak or isolate the service where required and make the work area safe.
- Remove loose material, contamination, old sealant and standing water as directed.
- Confirm the substrate and product temperature are within the allowed range.
- Apply to the stated dimensions and support or protect the repair during cure.
- Return the area to service only after the relevant product milestone.
Know when specialist advice is required
Building-code systems, potable water, gas, high pressure, structural movement and concealed waterproofing need explicit product approval and may require a licensed trade. Read the current Technical Data Sheet and Australian Safety Data Sheet for the exact pack and ask Selleys when the published information does not cover the intended use.
What to check for your job
- Use the Wet Area Silicone range. It is designed for permanently damp environments and includes options with different finishes and mould-resistance characteristics. One product elsewhere in our catalogue is described in waterproofing terms — Selleys Wet Area Matt White Silicone — along with the related sealing categories below. A separate waterproofing product listing is not available here.
- This category helps trade professionals explore waterproofing product information. It is not an individual product page. One product elsewhere in our catalogue is described in waterproofing terms — Selleys Wet Area Matt White Silicone — along with the related sealing categories below. A separate waterproofing product listing is not available here.
- Marine Flex is a high-performance adhesive sealant engineered for demanding waterproofing requirements. It delivers a waterproof seal and bond even in underwater applications and can be applied and cure underwater, making it ideal for pools, spas, and boats without draining the water.
- Selleys Storm provides an immediate waterproof seal on any building material, whether wet or dry, for both indoor and outdoor applications, and can even be applied in the rain to stop leaks instantly.
- PRO-TRADE Wet Area Sealant is a high-quality neutral cure silicone suitable for waterproofing applications in industrial kitchens, shower screens, baths, vanities, and basins. Additionally, Selleys Wet Area Silicone Sealant and Selleys Wet Area Matt Silicone are designed for constant and prolonged moisture exposure, providing waterproof sealing around baths, sinks, and showers.
- Yes, PRO-TRADE All Purpose Silicone is specifically designed for waterproofing applications, providing effective moisture protection for various surfaces and joints. Roofing silicone — roof and gutter sealants, including products described for application to wet surfaces. Construction silicone — sealants for brick, concrete and structural joints.
- Selleys Liquid Nails Flex creates a water-resistant seal once cured, making it suitable for bonding applications where moisture protection is beneficial in both indoor and outdoor settings.
Compare the options: Waterproofing Products
Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.
- Suitability: both substrates, coatings and service conditions.
- Application: preparation, tools, dimensions, coverage and working time.
- Waiting: support removal, water exposure, sanding, painting and full cure.
- Finish: colour, visibility, flexibility, paintability and clean-up.
- Evidence: the current pack, Technical Data Sheet and Australian Safety Data Sheet.
Open the individual page for every shortlisted product. Where this category contains a retained discontinued page, use it to identify older stock or work and confirm current availability or a replacement directly with us.
Complete joint-planning checklist for Waterproofing Products
Record every adjoining material, coating and primer; the joint width and depth; expected movement; water, weather and temperature exposure; and the required colour, finish and paintability. Cure chemistry, substrate compatibility and joint geometry matter as much as the range name.
- Remove failed sealant and contamination without damaging the surrounding surface.
- Confirm whether primer, backing rod or a particular joint ratio is required.
- Plan masking, application and tooling within the published working time.
- Protect the bead from water, movement, dust and service during cure.
- Use the exact product documents for paint, immersion and maintenance limits.
Do not treat elongation at break as rated joint movement, or mould resistance as a promise of a maintenance-free joint. Aquariums, drinking water, natural stone, structural glazing and permanent immersion need explicit approval.
Details to check before you choose
- The page is published by us, an Australian adhesives, sealants and fillers brand founded by Martin Selley in 1939 in Sydney, Australia, and is a division of DuluxGroup (Australia) Pty Ltd.
Others in this range
Alongside this product:
- All Products
- Best Wood, Gap & Wall Fillers
- Building Products
- Car Care & Cleaning
- Carpentry Products
- Caulking, Silicon & Sealant Guns
- Discover Selleys Product Brands
- Flooring Products
- Glazing Products
- Home Cleaning Products & Cleaning Supplies
- Painting & Wallpaper
- Painting Products
- Plastering Products
- Plumbing Products
Browse from here
Where this page sits:
Is a wet area silicone a complete waterproofing membrane?
No. A joint-sealing product should not be treated as a complete waterproofing system. Confirm the requirements for your application.
Does waterproof mean suitable for permanent immersion?
Not necessarily. Check the exact product’s immersion, substrate, cure and service limitations before use.
What do we list under waterproofing, and where should you look next?
For waterproofing information, one product to explore is Selleys Wet Area Matt White Silicone — along with the related sealing categories below. A separate waterproofing product listing is not available here. The distinction worth holding on to before you go further: sealing a joint and waterproofing a substrate are different jobs.
What is the product the catalogue associates with waterproofing?
Wet Area Matt White Silicone is described as offering a premium matte finish with strong waterproofing for wet areas, suited to modern bathrooms, combining appearance with sealing performance. The matte finish is the part that distinguishes it from the rest of the wet area range.
Where to look for sealing products?
Sealants — the parent category covering the full our sealing range; Wet area silicone — sealants for showers, bathrooms, kitchens and laundries; Roofing silicone — roof and gutter sealants, including products described for application to wet surfaces; Construction silicone — sealants for brick, concrete and structural joints.
What should I know about separate repair, sealing and waterproofing requirements?
Define the materials, the source and pressure of any water, whether the area is intermittently wet or continuously immersed, and whether the repair is part of a regulated plumbing or waterproofing system. A product associated with plumbing or wet areas is not automatically approved for drinking water, permanent immersion, pressurised service or use as a complete waterproofing membrane.
How do I prepare before applying?
Stop the leak or isolate the service where required and make the work area safe; Remove loose material, contamination, old sealant and standing water as directed; Confirm the substrate and product temperature are within the allowed range; Apply to the stated dimensions and support or protect the repair during cure; Return the area to service only after the relevant product milestone.
What should I know about know when specialist advice is required?
Building-code systems, potable water, gas, high pressure, structural movement and concealed waterproofing need explicit product approval and may require a licensed trade. Read the current Technical Data Sheet and Australian Safety Data Sheet for the exact pack and ask Selleys when the published information does not cover the intended use.
What should I check for my job?
Use the Wet Area Silicone range. It is designed for permanently damp environments and includes options with different finishes and mould-resistance characteristics. One product elsewhere in our catalogue is described in waterproofing terms — Selleys Wet Area Matt White Silicone — along with the related sealing categories below. A separate waterproofing product listing is not available here; This category helps trade professionals explore waterproofing product information. It is not an individual product page. One product elsewhere in our catalogue is described in waterproofing terms — Selleys Wet Area Matt White Silicone — along with the related sealing categories below. A separate waterproofing product listing is not available here.
How do I compare the options?
Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.
What should I know about complete joint-planning checklist for Waterproofing Products?
Record every adjoining material, coating and primer; the joint width and depth; expected movement; water, weather and temperature exposure; and the required colour, finish and paintability. Cure chemistry, substrate compatibility and joint geometry matter as much as the range name. Do not treat elongation at break as rated joint movement, or mould resistance as a promise of a maintenance-free joint.
What details should I check before choosing?
The page is published by us, an Australian adhesives, sealants and fillers brand founded by Martin Selley in 1939 in Sydney, Australia, and is a division of DuluxGroup (Australia) Pty Ltd.