Plastering Products

How to decide between a rigid and a flexible filler

This is the one distinction that determines most filling purchases, and it is worth settling before you click through to a product.

A rigid filler is for a defect in a flat surface — a crack, a chip, a dent or a screw hole in a wall or ceiling. We describe its rigid gap fillers as developed for surfaces that are not expected to move or flex. They set hard and can be sanded back level with the surrounding surface.

A flexible filler is for a gap between two surfaces — the line where a skirting board meets a wall, or where a cornice, window or door frame meets plaster. We describe these as retaining flexibility once cured, which is what makes them suit surfaces where movement might occur.

The practical consequence is straightforward. A joint between two building elements moves as the building itself moves with temperature and load. A rigid filler in that joint has nowhere to put the movement, so it cracks along the line and eventually falls out. A flexible filler absorbs it. Getting this right costs nothing at the point of purchase and saves redoing the job.

What do we list under plastering, and where should you look instead?

Start by deciding whether your job needs a rigid or flexible filler, then explore the related product categories below. A separate plastering product listing is not available here.

If you have arrived here looking for something to fill, patch or make good a plaster surface, the products you want are catalogued under fillers. Use the links below to get to a page that lists real products.

What this category covers

This page helps trade professionals find plastering product information. A separate product listing is not available here, so check the linked categories and exact product instructions before choosing.

Where the products are indexed

These Selleys category pages exist and are where filling and patching products are listed. They are the right places to continue from:

Compare the options: Plastering Products

Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.

  1. Suitability: both substrates, coatings and service conditions.
  2. Application: preparation, tools, dimensions, coverage and working time.
  3. Waiting: support removal, water exposure, sanding, painting and full cure.
  4. Finish: colour, visibility, flexibility, paintability and clean-up.
  5. Evidence: the current pack, Technical Data Sheet and Australian Safety Data Sheet.

Open the individual page for every shortlisted product. Where this category contains a retained discontinued page, use it to identify older stock or work and confirm current availability or a replacement directly with us.

Before you start: Plastering Products

Start with the exact task, materials, exposure and finish. Record what the product must do, where it will be used, what it must contact, and what can happen if it is unsuitable. Compare those facts with the current product page, pack label and technical documentation.

  1. Read the complete method and limitations before opening the pack.
  2. Prepare surfaces, tools, supports and personal protective equipment.
  3. Confirm temperature, ventilation and weather conditions for application and cure.
  4. Keep within the stated dimensions, coverage, working time and waiting periods.
  5. Stop and obtain advice when the intended use is not expressly covered.

Range names and broad category labels are useful for finding options, but only the exact product instructions establish compatibility and use.

Details to check before you choose

Document the job and check the result

Before application, record the product name, pack size, batch or identifying details, document revision, substrates and conditions. Photograph concealed preparation or joint details when they may matter later. This creates a clear reference if the finish, cure or compatibility needs to be reviewed.

After the stated waiting period, inspect the work for adhesion, continuity, alignment, coverage, surface change and the required finish. Check it again after first service where appropriate. A failure at an edge, interface or recurring crack can indicate contamination, movement, moisture, unsupported load or an unsuitable joint design rather than simply too little product.

Maintain and revisit Plastering Products

Follow the published cleaning and maintenance directions and avoid chemicals or tools that can damage the cured product or adjoining surface. Keep ventilation, drainage and movement joints working as designed. When repair is needed, identify why the original work failed before adding more material or coating over it.

Product names, formulations and documents can change. Use the current instructions for later maintenance or extension work and do not assume leftover material or an older installation matches today’s product.

Others in this range

Alongside this product:

Browse from here

Where this page sits:

Should I use wall filler or flexible gap filler?

Start with the location and movement: compare wall fillers for stable surface defects and flexible gap fillers for suitable joints between surfaces. Check the specific product’s limits.

Does a fast-drying label apply to a deep repair?

Use the stated application thickness and conditions. Deeper fills can need a different method or more drying time.

How do I decide between a rigid and a flexible filler?

This is the one distinction that determines most filling purchases, and it is worth settling before you click through to a product. A rigid filler is for a defect in a flat surface — a crack, a chip, a dent or a screw hole in a wall or ceiling.

What do we list under plastering, and where should you look instead?

Start by deciding whether your job needs a rigid or flexible filler, then explore the related product categories below. A separate plastering product listing is not available here. If you have arrived here looking for something to fill, patch or make good a plaster surface, the products you want are catalogued under fillers.

What does this category cover?

This page helps trade professionals find plastering product information. A separate product listing is not available here, so check the linked categories and exact product instructions before choosing.

Where the products are indexed?

These Selleys category pages exist and are where filling and patching products are listed. They are the right places to continue from: Putty and fillers — the parent category for everything We make for filling gaps, cracks and holes on and between surfaces; Wall filler — rigid fillers for cracks, chips, holes and dents in surfaces that are not expected to move or flex; Gap filler — flexible fillers that stay flexible once cured, for joints between surfaces where movement occurs; Specialist fillers and putty — the putties and epoxy repair compounds for jobs the general fillers do not cover.

How do I compare the options?

Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.

What should I know about before you start?

Start with the exact task, materials, exposure and finish. Record what the product must do, where it will be used, what it must contact, and what can happen if it is unsuitable. Compare those facts with the current product page, pack label and technical documentation.

What details should I check before choosing?

Use a flexible gap filler for that moving joint; A rigid wall filler is intended for stable defects and is not the right range for this location; The page allows users to browse Selleys plastering products for trade professionals; Spakfilla Rapid is a fast-drying, lightweight ready-mixed filler suitable for interior and exterior applications; It dries in just 30 minutes for thin applications and can be painted immediately after; It is suitable for filling wallboard, wood, masonry, plaster, primed nail heads, and plasterboard; Selleys Spakfilla Heavy Duty is a tough, durable light grey ready-mixed filler suitable for interior and exterior use on plaster, timber, concrete, brick, stone, and masonry surfaces.

What should I know about document the job and check the result?

Before application, record the product name, pack size, batch or identifying details, document revision, substrates and conditions. Photograph concealed preparation or joint details when they may matter later. This creates a clear reference if the finish, cure or compatibility needs to be reviewed. After the stated waiting period, inspect the work for adhesion, continuity, alignment, coverage, surface change and the required finish.

What should I know about maintain and revisit Plastering Products?

Follow the published cleaning and maintenance directions and avoid chemicals or tools that can damage the cured product or adjoining surface. Keep ventilation, drainage and movement joints working as designed. When repair is needed, identify why the original work failed before adding more material or coating over it.

Which filler type suits the moving joint above a skirting board?

Use a flexible gap filler for that moving joint. A rigid wall filler is intended for stable defects and is not the right range for this location. A flexible filler is for a gap between two surfaces — the line where a skirting board meets a wall, or where a cornice, window or door frame meets plaster. A joint between two building elements moves as the building itself moves with temperature and load.