Selleys No More Gaps: Advanced Versatile Gap Filler | Coloured & Water Resistant

Compare the products below with your materials, conditions and the finish you need.

Selleys No More Gaps fillers

Choose a filler for the gap location, expected movement, finish and paint system. The range includes interior, exterior, coloured and timber-floor products; their instructions are not interchangeable.

Explore the range

Use this category to build a shortlist

Start with the exact job, materials and conditions. Record the substrate and any coating, whether the surface is porous, the size of the repair or joint, indoor or outdoor exposure, water, heat, movement, load and the finish required. Products grouped on one category page can still differ in chemistry, working time, cure, limitations and safety.

Open each candidate product and compare the current instructions. Separate working time, support or protection time, paint or sanding readiness and full cure. Check whether the finished work must remain flexible, accept paint, tolerate weather or water, or carry load.

Prepare the work before opening the pack

  1. Read the full method and limitations for the exact product.
  2. Clean, dry and prepare the surface using compatible materials.
  3. Gather tools, masking, supports and personal protective equipment.
  4. Confirm temperature, weather and ventilation for application and cure.
  5. Follow the stated dimensions, coverage and waiting times.

Confirm documents and availability

Use the current pack label, Technical Data Sheet and Australian Safety Data Sheet. Category pages and retained discontinued-product pages help with comparison but do not establish current stock or a replacement product. Ask Selleys when a required material, exposure or use is not expressly covered.

Choose from movement, location and finish

Measure the gap and decide whether it is an interior finishing joint, an exterior gap, a wet-area transition or a timber-floor joint. Compare the expected movement and the finish after cure. Paint timing changes with paint type, gap dimensions and temperature, while sanding readiness and water protection are separate milestones.

Use Wet Area Silicone where the job needs a waterproof sanitary seal around a bath, shower or sink. A water-resistant gap filler does not replace that seal. For exterior work, use a product whose current instructions cover the exposure and protect it from water for the stated period.

What to check for your job

Compare the options: Selleys No More Gaps: Advanced Versatile Gap Filler | Coloured & Water Resistant

Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.

  1. Suitability: both substrates, coatings and service conditions.
  2. Application: preparation, tools, dimensions, coverage and working time.
  3. Waiting: support removal, water exposure, sanding, painting and full cure.
  4. Finish: colour, visibility, flexibility, paintability and clean-up.
  5. Evidence: the current pack, Technical Data Sheet and Australian Safety Data Sheet.

Open the individual page for every shortlisted product. Where this category contains a retained discontinued page, use it to identify older stock or work and confirm current availability or a replacement directly with us.

Complete repair-planning checklist for Selleys No More Gaps: Advanced Versatile Gap Filler | Coloured & Water Resistant

Decide whether the repair is decorative, load-bearing or part of a moving joint. Measure width and depth, identify the base material, and define whether the finished repair must be sanded, painted, stained, nailed, drilled or exposed outdoors. A flexible gap filler and a rigid repair compound solve different problems.

  1. Remove loose material and confirm the edges are sound.
  2. Check maximum application depth and whether the repair must be built in layers.
  3. Follow the stated mixing, kneading, working and shaping time.
  4. Allow the stated drying or cure period before sanding, drilling, painting or loading.
  5. Protect exterior repairs from water and weather for the required period.

Do not assume a hard cured surface can carry a screw or structural load. Use only the capability stated for the exact product and application.

More help for your project

Use these pages to compare the exact product, method or application that follows from Selleys No More Gaps: Advanced Versatile Gap Filler | Coloured & Water Resistant. A related page is a route into more specific information, not evidence that every product is interchangeable.

Product instructions and safety sheets

Ready to choose a product? Use the links below for the products featured on this page. Check the exact product, pack and application before you start. Each product has its own directions and limitations.

Need help matching a document or checking your job? Contact our team. You can also find a store.

Is Interior Multipurpose’s paint-ready time its full cure time?

No. Paint readiness depends on joint size, temperature and paint type and is separate from full cure. Follow the exact product instructions.

Can Bathroom & Kitchen gap filler replace silicone around a bath or shower?

No. Use the product for its listed humid-room gaps; bath, sink and shower joints need a sealant specifically suitable for that location.

Can Bricks & Mortar replace construction mortar or fill moving cracks?

No. Its technical sheet explicitly excludes those uses and frequent water immersion.

What should I know about Selleys No More Gaps fillers?

Choose a filler for the gap location, expected movement, finish and paint system. The range includes interior, exterior, coloured and timber-floor products; their instructions are not interchangeable.

What should I know about use this category to build a shortlist?

Start with the exact job, materials and conditions. Record the substrate and any coating, whether the surface is porous, the size of the repair or joint, indoor or outdoor exposure, water, heat, movement, load and the finish required. Products grouped on one category page can still differ in chemistry, working time, cure, limitations and safety.

How do I prepare the work before opening the pack?

Read the full method and limitations for the exact product; Clean, dry and prepare the surface using compatible materials; Gather tools, masking, supports and personal protective equipment; Confirm temperature, weather and ventilation for application and cure; Follow the stated dimensions, coverage and waiting times.

How do I confirm documents and availability?

Use the current pack label, Technical Data Sheet and Australian Safety Data Sheet. Category pages and retained discontinued-product pages help with comparison but do not establish current stock or a replacement product. Ask Selleys when a required material, exposure or use is not expressly covered.

How do I choose from movement, location and finish?

Measure the gap and decide whether it is an interior finishing joint, an exterior gap, a wet-area transition or a timber-floor joint. Compare the expected movement and the finish after cure. Paint timing changes with paint type, gap dimensions and temperature, while sanding readiness and water protection are separate milestones.

What should I check for my job?

For gaps no deeper than 5 mm and no wider than 10 mm above 20°C, the TDS gives 10 minutes for gloss/low-sheen, 100 minutes for flat and 120 minutes for ceiling paint; oil-based paints need 24–48 hours. Its semi-gloss table entry says zero but its directions require a skin first: confirm rather than assuming immediate painting; The TDS gives approximately 30 minutes for suitable water-based paint under the specified gap-size and temperature conditions. Other paint types, cold weather and larger gaps need longer. Paint readiness is not full cure.

How do I compare the options?

Use this category to create a shortlist, then compare the exact candidates in a simple job table. Record the materials, location, exposure, movement or load, required finish, working time, support or protection period, full cure and major exclusions. A shared category or brand name does not make the products interchangeable.

What should I know about complete repair-planning checklist for Selleys No More Gaps?

Decide whether the repair is decorative, load-bearing or part of a moving joint. Measure width and depth, identify the base material, and define whether the finished repair must be sanded, painted, stained, nailed, drilled or exposed outdoors. A flexible gap filler and a rigid repair compound solve different problems.

Which instructions and safety sheets cover this product?

Ready to choose a product? Use the links below for the products featured on this page. Check the exact product, pack and application before you start. Each product has its own directions and limitations. Need help matching a document or checking your job? Contact our team .